2021 HANGCHA Four-wheel Drive Rough Terrain Forklift 10,000 lbs RT50

Information

2021 HANGCHA Four-wheel Drive Rough Terrain Forklift 10,000 lbs RT50

HANGCHA 10,000lbs rough terrain forklift with 4WD was developed on the basis of the XF series of Hangcha. It adopts the Deutz engine, which is powerful and reliable, easy to maintain; It can adapt to the rugged roads in the stone market, timber market, construction sites, etc., as well as the wet and slippery roads in rain and snow.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2021
  • HANGCHA
  • Four-wheel Drive Rough Terrain Forklift 10,000 lbs RT50
  • Diesel
  • Available
  • Fork-carriage: 76.8 in (1950 mm) | Aisle: 248 in (6305 mm)
  • mast lowered: 104.6 in (2685 mm) | mast extended: 178.5 in (4534 mm) | of overhead guard: 101.4 in (2575 mm)

Specifications

  • 2021
  • HANGCHA
  • Four-wheel Drive Rough Terrain Forklift 10,000 lbs
  • RT50
  • General
  • CPCD50-XW65C-RT4 / DEUTZ TCD 3.6 L4
  • Tier4F
  • 74.3/2300(55.4/2300) hp/r/min(kw/r/min)
  • Diesel
  • 390/1300 N·m/r/min
  • 4
  • 3620 cm3
  • Pneumatic 4x4
  • 445/65-22.5
  • 12.5/80-18
  • Hydraulic
  • Mechanical
  • 24/90 V/Ah
  • Travel speed, laden/unladen: 15.5/15.5 mph (25/25 km/h) | Lift speed, laden: 88.6/102.4 ft/min (0.45/0.52 m/s) | Lowering speed, laden: 98.4/84.7 in (0.5/0.43 mm)
  • Drawbar pull, laden: 85000 N
  • Load centre distance: 24 in (600 mm) | Load distance, centre of drive axle to fork: 28.9 in (735 mm) | Tread, front: 65.3 in (1660 mm) | Tread, rear: 69.3 in (1760 mm) | Tilt of mast/fork carriage forward/backward: 15/15° | Free lift: 10.2 in (260 mm) | Lift: 118.1 in (3000 mm) | Fork dimensions: 2.4×5.9×47.2 in (60×150×1200 mm) | Distance between fork-arms: 11.4-76.8 in (290-1950 mm) | Gradeability, laden: 45%
  • 84.6 in (2150 mm)
  • mast lowered: 104.6 in (2685 mm) | mast extended: 178.5 in (4534 mm) | of overhead guard: 101.4 in (2575 mm)
  • 191.5 in (4865 mm)
  • to face of forks: 144.3 in (3665 mm)
  • 82.9 in (2105 mm)
  • Fork-carriage: 76.8 in (1950 mm) | Aisle: 248 in (6305 mm)
  • Laden, below mast: 15.1 in (385 mm) | Centre of wheelbase: 14.6 in (370 mm)
  • 163.4 in (4150 mm)
  • 10000 lb (5000 kg)
  • Loading, laden: 27100 lb (12300 kg) | Loading, unladen: 9370 lb (4250 kg)
  • Loading, laden: 3520 lb (1600 kg) | Loading, unladen: 10250 lb (4650 kg)
  • 30.4 gal (115 liter)
  • 31.7 gal (120 liter)
  • 19620 lb (8900 kg)
  • Operator type: Seated