2021 HANGCHA Four-wheel Drive Rough Terrain Forklift 10,000 lbs RT50
- Year 2021
- Make HANGCHA
- Model Four-wheel Drive Rough Terrain Forklift 10,000 lbs
2021 HANGCHA Four-wheel Drive Rough Terrain Forklift 10,000 lbs RT50
2021 HANGCHA Four-wheel Drive Rough Terrain Forklift 10,000 lbs RT50
HANGCHA 10,000lbs rough terrain forklift with 4WD was developed on the basis of the XF series of Hangcha. It adopts the Deutz engine, which is powerful and reliable, easy to maintain; It can adapt to the rugged roads in the stone market, timber market, construction sites, etc., as well as the wet and slippery roads in rain and snow.
Engine
Engine Manufacturer
CPCD50-XW65C-RT4 / DEUTZ TCD 3.6 L4
Emissions
Tier4F
Engine Power
74.3/2300(55.4/2300) hp/r/min(kw/r/min)
Fuel Type
Diesel
Rated Engine Speed
390/1300 N·m/r/min
Cylinder Liners
4
Displacement
3620 cm3
Wheels & Tires
Wheels
Pneumatic 4x4
Tires, Front Specification
445/65-22.5
Tires, Rear Specification
12.5/80-18
Brakes
Brake System Type
Hydraulic
Parking Brake
Mechanical
Battery
Battery
24/90 V/Ah
Operational
Operating Speed
Travel speed, laden/unladen: 15.5/15.5 mph (25/25 km/h) | Lift speed, laden: 88.6/102.4 ft/min (0.45/0.52 m/s) | Lowering speed, laden: 98.4/84.7 in (0.5/0.43 mm)
Operating Conditions
Drawbar pull, laden: 85000 N
Dimensions
Dimensions
Load centre distance: 24 in (600 mm) | Load distance, centre of drive axle to fork: 28.9 in (735 mm) | Tread, front: 65.3 in (1660 mm) | Tread, rear: 69.3 in (1760 mm) | Tilt of mast/fork carriage forward/backward: 15/15° | Free lift: 10.2 in (260 mm) | Lift: 118.1 in (3000 mm) | Fork dimensions: 2.4×5.9×47.2 in (60×150×1200 mm) | Distance between fork-arms: 11.4-76.8 in (290-1950 mm) | Gradeability, laden: 45%
Wheelbase
84.6 in (2150 mm)
Height
mast lowered: 104.6 in (2685 mm) | mast extended: 178.5 in (4534 mm) | of overhead guard: 101.4 in (2575 mm)
Overall Length
191.5 in (4865 mm)
Length
to face of forks: 144.3 in (3665 mm)
Overall Width
82.9 in (2105 mm)
Width
Fork-carriage: 76.8 in (1950 mm) | Aisle: 248 in (6305 mm)
Ground Clearance
Laden, below mast: 15.1 in (385 mm) | Centre of wheelbase: 14.6 in (370 mm)
Turning Radius
163.4 in (4150 mm)
Capacities
Load Capacity, Land
10000 lb (5000 kg)
Axle Capacity, Front
Loading, laden: 27100 lb (12300 kg) | Loading, unladen: 9370 lb (4250 kg)
Axle Capacity, Rear
Loading, laden: 3520 lb (1600 kg) | Loading, unladen: 10250 lb (4650 kg)
Hydraulic Capacity
30.4 gal (115 liter)
Fuel Capacity
31.7 gal (120 liter)
Weights
Weight
19620 lb (8900 kg)
Features
Features
Operator type: Seated