Harvey & Company LTD

  • 88 Kenmount Road
  • St. Johns, NL A1B 3R1
  • Call Us: (709) 738-8911
  • https://www.harveyco.com/
Print This Page

2025 HANGCHA IC Cushion Tire 13,500-15,500lbs FP70C

Information

2025 HANGCHA IC Cushion Tire 13,500-15,500lbs FP70C

XF Series LPG Cushion Tire Forklift is developed on basis of existing XF series by Hangcha, with world-leading technologies, a world-class forklift that can meet your demand in all dimensions thanks to the overall upgrading in appearance modeling, energy conservation and environmental protection, comfort, safety, and reliability. Application of new technologies including load-sensing hydraulic system, energy-efficient lighting system, low-emission engine, effective noise and vibration control, and brand-new control system offers higher efficiency and lower cost for your work.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2025
  • HANGCHA
  • IC Cushion Tire 13,500-15,500lbs FP70C
  • 70 A
  • OKAMURA Powershift
  • LPG
  • Available
  • Backrest: 51.5 in (1308 mm) | Fork-carriage: 49.2 in (1250 mm) | Aisle width for pallets 1000 x 1200 crossways: 168.4 in (4278 mm) | Aisle width for pallets 800 x 1200 lengthways: 176.3 in (4478 mm)
  • mast lowered: 98.4 in (2500 mm) | Free lift: 6.7 in (170 mm) | Lift: 118.1 in (3000 mm) | mast extended: 171.5 in (4357 mm) | of overhead guard: 88 in (2235 mm) | Seat: 50.4 in (1280 mm) | Coupling: 16.1 in (410 mm)

Specifications

  • 2025
  • HANGCHA
  • IC Cushion Tire 13,500-15,500lbs
  • FP70C
  • Cushion Tire
  • CPYD70-XW24B-C | PSI 4.3L LPG CERT
  • 105 hp (77 kW)
  • LPG
  • 2300 r/min
  • 6
  • 4294 cm3
  • 332.85/1400 N·m/r/min
  • OKAMURA Powershift
  • FWD/RVS: 1/1
  • Cushion 2×/2
  • 28×12×22
  • 22×10×16
  • Hydraulic
  • Mechnical
  • 70 A
  • Vehicle electrical system voltage: 12 V
  • 12/60 V/Ah
  • Travel speed, laden/unladen: 13/13.7 mph (21/22 km/h) | Lift speed, laden/unladen: 94.5/100.4 ft/min (0.48/0.51 m/s) | Lowering speed, laden/unladen: 98.4/74.8 ft/min (0.500/0.380 m/s)
  • Drawbar pull, laden/unladen: 44000/ N
  • 2683 psi(18.5 MPa) | for attachments: 3132 psi (21.6 MPa)
  • Load centre distance: 24 in (600 mm) | Load distance, centre of drive axle to fork: 19.8 in (503 mm) | Tread, front: 44.6 in (1133 mm) | Tread, rear: 46.6 in (1184 mm) | Tilt of mast/fork carriage forward/backward: 6/10° | Fork dimensions: 2.6×6×48 in(65×150×1220 mm) | Distance between fork-arms: 12.3-47.2 in (312-1198 mm) | Minimum plvoting distance: 24.3 in (617 mm) | Gradeability, laden/unladen 1mph(1.5km/h): 23/ %
  • 72 in (1830 mm)
  • mast lowered: 98.4 in (2500 mm) | Free lift: 6.7 in (170 mm) | Lift: 118.1 in (3000 mm) | mast extended: 171.5 in (4357 mm) | of overhead guard: 88 in (2235 mm) | Seat: 50.4 in (1280 mm) | Coupling: 16.1 in (410 mm)
  • 163.6 in (4155 mm)
  • to face of forks: 115.6 in (2935 mm)
  • 56.6 in (1438 mm)
  • Backrest: 51.5 in (1308 mm) | Fork-carriage: 49.2 in (1250 mm) | Aisle width for pallets 1000 x 1200 crossways: 168.4 in (4278 mm) | Aisle width for pallets 800 x 1200 lengthways: 176.3 in (4478 mm)
  • laden, below mast: 4.3 in (110 mm) | centre of wheelbase: 7.5 in (190 mm)
  • 101.6 in (2580 mm) | Internal: 27.6 in (702 mm)
  • 15500 lb (7000 kg)
  • Loading, laden: 32170 lb (14590 kg) | Loading, unladen: 7100 lb (3220 kg)
  • Loading, laden: 4320 lb (1960 kg) | Loading, unladen: 13960 lb (6330 kg)
  • 26.4 gal (100 liter)
  • Service: 21060 lb (9550 kg)
  • Operator type: Seated