2025 HANGCHA IC Cushion Tire 13,500-15,500lbs FP70C

Current HANGCHA Internal-Combustion-Cushion-Tire IC Cushion Tire 13,500-15,500lbs

Swipe to View More

Year 2025
Make HANGCHA
Model IC Cushion Tire 13,500-15,500lbs

Year 2025
Manufacturer HANGCHA
Model Name IC Cushion Tire 13,500-15,500lbs
Trim Name FP70C
Generic Type (Primary) Cushion Tire
Engine Manufacturer CPYD70-XW24B-C | PSI 4.3L LPG CERT
Engine Power 105 hp (77 kW)
Fuel Type LPG
Rated Engine Speed 2300 r/min
Cylinder Liners 6
Displacement 4294 cm3
Engine Torque 332.85/1400 N·m/r/min

XF Series LPG Cushion Tire Forklift is developed on basis of existing XF series by Hangcha, with world-leading technologies, a world-class forklift that can meet your demand in all dimensions thanks to the overall upgrading in appearance modeling, energy conservation and environmental protection, comfort, safety, and reliability. Application of new technologies including load-sensing hydraulic system, energy-efficient lighting system, low-emission engine, effective noise and vibration control, and brand-new control system offers higher efficiency and lower cost for your work.

Engine

Engine Manufacturer CPYD70-XW24B-C | PSI 4.3L LPG CERT

Engine Power 105 hp (77 kW)

Fuel Type LPG

Rated Engine Speed 2300 r/min

Cylinder Liners 6

Displacement 4294 cm3

Engine Torque 332.85/1400 N·m/r/min

Drivetrain

Transmission OKAMURA Powershift

Stages FWD/RVS: 1/1

Wheels & Tires

Wheels Cushion 2×/2

Tires, Front Specification 28×12×22

Tires, Rear Specification 22×10×16

Brakes

Brake System Type Hydraulic

Parking Brake Mechnical

Electric

Generator 70 A

Electrical Vehicle electrical system voltage: 12 V

Battery

Battery 12/60 V/Ah

Operational

Operating Speed Travel speed, laden/unladen: 13/13.7 mph (21/22 km/h) | Lift speed, laden/unladen: 94.5/100.4 ft/min (0.48/0.51 m/s) | Lowering speed, laden/unladen: 98.4/74.8 ft/min (0.500/0.380 m/s)

Operating Conditions Drawbar pull, laden/unladen: 44000/ N

Maximum Pressure 2683 psi(18.5 MPa) | for attachments: 3132 psi (21.6 MPa)

Dimensions

Dimensions Load centre distance: 24 in (600 mm) | Load distance, centre of drive axle to fork: 19.8 in (503 mm) | Tread, front: 44.6 in (1133 mm) | Tread, rear: 46.6 in (1184 mm) | Tilt of mast/fork carriage forward/backward: 6/10° | Fork dimensions: 2.6×6×48 in(65×150×1220 mm) | Distance between fork-arms: 12.3-47.2 in (312-1198 mm) | Minimum plvoting distance: 24.3 in (617 mm) | Gradeability, laden/unladen 1mph(1.5km/h): 23/ %

Wheelbase 72 in (1830 mm)

Overall Length 163.6 in (4155 mm)

Length to face of forks: 115.6 in (2935 mm)

Overall Width 56.6 in (1438 mm)

Width Backrest: 51.5 in (1308 mm) | Fork-carriage: 49.2 in (1250 mm) | Aisle width for pallets 1000 x 1200 crossways: 168.4 in (4278 mm) | Aisle width for pallets 800 x 1200 lengthways: 176.3 in (4478 mm)

Ground Clearance laden, below mast: 4.3 in (110 mm) | centre of wheelbase: 7.5 in (190 mm)

Turning Radius 101.6 in (2580 mm) | Internal: 27.6 in (702 mm)

Capacities

Load Capacity, Land 15500 lb (7000 kg)

Axle Capacity, Front Loading, laden: 32170 lb (14590 kg) | Loading, unladen: 7100 lb (3220 kg)

Axle Capacity, Rear Loading, laden: 4320 lb (1960 kg) | Loading, unladen: 13960 lb (6330 kg)

Hydraulic Capacity 26.4 gal (100 liter)

Weights

Weight Service: 21060 lb (9550 kg)

Features

Features Operator type: Seated

2025 HANGCHA IC Cushion Tire 13,500-15,500lbs FP70C