2022 Kubota TR Series TR60

Information

2022 Kubota TR Series TR60

Engineered for rental yards, contractors, and developers to dig trenches for water, electrical drainage and more. Available in two common sizes, 4’ and 5’ trenching depths, and features 4 different chain styles for each model—adaptable to clay, sand, and different degrees of compacted soil.

Features may include:

Frame

Heavy frame construction stands up to everyday rugged use.

Front bearings

Machined and enclosed front bearings are protected against dirt and offer extended life.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2022
  • Kubota
  • TR Series TR60
  • Available
  • Frame w/step: 61.13" (1.55 m) | Trenching available: 6", 8" & 10" (15.2 cm, 20.3 cm, 25.4 cm)

Specifications

  • 2022
  • Kubota
  • TR Series
  • TR60
  • Skid Steers
  • Low flow (LF) & high flow (HF) motors
  • Chain speed (Depending on skid steer flow & pressure ratings): Low flow 227-366 fpm (69-112 m/min) | High flow: 221-373 fpm (67-114 m/min)
  • motor requirements: Low flow 12-24 gpm (45.4-90.8 lpm) | High flow: 24-40 gpm (90.8-151.4 lpm)
  • Hydraulic motor range: Low flow 2400-4500 psi (16.55-31.03 MPa) | High flow: 2000-3600 psi (13.79-24.82 MPa)
  • Side shift travel: 22" (55.9 cm) | Side shift options Manual: Side shifts from center to 22” (55.9 cm) right of center | Hydraulic: Side shifts from center to 22” (55.9 cm) right of center
  • 102.5” (2.60 m)
  • Standard boom: 77.5" (1.97 m)
  • Digging at 60 degrees: 5 ft (1.52 m)
  • Frame w/step: 61.13" (1.55 m) | Trenching available: 6", 8" & 10" (15.2 cm, 20.3 cm, 25.4 cm)
  • 64" (1.63 m)
  • 34.1" (86.6 cm)
  • 15.5" (39.4 cm) | clearance: 28.5" - 30.5" (72.4 cm - 77.5 cm)
  • Operating With 2 pitch cup chain and hydraulic side shift: 1300 lbs (589.7 kg)
  • Frame: Heavy duty 5/16” (8 mm) thick w/ 3/4" (19 mm) reinforced bar around three sides the bottom lock pin slots