2025 HANGCHA 4-Wheel Drive Rough Terrain 11,000-2,2000lbs CPCD70-XW70C-RT4
- Year 2025
- Make HANGCHA
- Model 4-Wheel Drive Rough Terrain 11,000-2,2000lbs
2025 HANGCHA 4-Wheel Drive Rough Terrain 11,000-2,2000lbs CPCD70-XW70C-RT4
2025 HANGCHA 4-Wheel Drive Rough Terrain 11,000-2,2000lbs CPCD70-XW70C-RT4
HANGCHA 11,000-22,000lbs rough terrain forklift with 4WD was developed on the basis of the XF series of Hangcha. It adopts the Deutz engine, which is powerful and reliable, easy to maintain; It can adapt to the rugged roads in the stone market, timber market, construction sites, etc., as well as the wet and slippery roads in rain and snow.
Engine
Engine Manufacturer
CPCD70-XW70C-RT4 | CUMMINS QSF3.8t3TC115
Engine Power
According to DIN ISO 1585: 86/2200 kW/r/min
Fuel Type
Diesel
Rated Engine Speed
200/1500~1800 r/min
Cylinder Liners
4
Displacement
3759 cm3
Engine Torque
470/1100-1700 N·m/r/min
Emissions
EURO IIIA/GB3
Bore
114x145mm
Drivetrain
Transmission
Manufacturer: DANA | Type: TE-30
Steering Angle, Right
7760+J+F mm
Wheels & Tires
Wheels
2×/2×
Tires, Front Specification
445/65-22.5-24PR Pneumatic
Tires, Rear Specification
12.5/80-18-16PR Pneumatic
Brakes
Brake System Type
Service: Wet brake
Parking Brake
Mechanical
Battery
Battery
2-12/90 V/Ah
Electric
Electrical
Vehicle electrical system voltage: 24 V
Operational
Operating Speed
Travel speed, laden/unladen: 25/25 Km/h | Lift speed, laden/unladen: 0.41/43 m/s | Lowering, laden/unladen: 0.46/0.39 m/s
Operating Conditions
Drawbar pull, laden: 87000/- N
Maximum Pressure
255 bar
Performance
Noise Level
Sound pressure level at the driver's seat: 78 Db
Dimensions
Dimensions
Load centre distance: 600 mm | Load distance, centre of drive axle to fork: 740 mm | Tread, front: 1700 mm | Tread, rear: 1760 mm | Tilt of mast/fork carriage forward/backward: 15/15° | Lift: 3000 mm | Free Lift: 175 mm | Fork dimensions ISO 2331: 65×150×1220 mm | Distance between fork-arms: 300-1950 mm | Gradeability, laden: 59/-% | Minimum pivoting point distance: 3040 mm
Wheelbase
2500 mm
Height
mast lowered: 2935 mm | mast extended: 4534 mm | of overhead guard: 2575 mm | Seat relating to SIP: 2840 mm | Coupling: 860 mm
Overall Length
5360 mm
Length
to face of forks: 4140 mm
Overall Width
2145 mm
Width
Fork-Carriage: 1950 mm | Aisle: 7450 mm
Ground Clearance
Laden, below mast: 385 mm | Centre of wheelbase: 387 mm
Turning Radius
5290 mm
Capacities
Load Capacity, Land
7000 Kg | Axle loading, laden front/rear: 15140/2260 Kg | Axle loading, unladen front/rear: 4310/6090 Kg
Volume
Oil for attachments: 500 l/min
Fuel Capacity
Fuel tank: 120 liter | Hydraulic Tank - (drain & refill): 115 liter
Weights
Weight
Service: 10400 Kg
Features
Features
Operator type: Seated | Stage FWD/RVS: 5/3 | Fork carriage DIN 15 173 --- ISO 2328, class/type A,B: IVB