2025 HANGCHA 4-Wheel Drive Rough Terrain 11,000-2,2000lbs CPCD50-XW65E-RT2

Information

2025 HANGCHA 4-Wheel Drive Rough Terrain 11,000-2,2000lbs CPCD50-XW65E-RT2

HANGCHA 11,000-22,000lbs rough terrain forklift with 4WD was developed on the basis of the XF series of Hangcha. It adopts the Deutz engine, which is powerful and reliable, easy to maintain; It can adapt to the rugged roads in the stone market, timber market, construction sites, etc., as well as the wet and slippery roads in rain and snow.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2025
  • HANGCHA
  • 4-Wheel Drive Rough Terrain 11,000-2,2000lbs CPCD50-XW65E-RT2
  • Manufacturer: DANA | Type: TE-30
  • Diesel
  • Available
  • Fork-Carriage: 1950 mm | Aisle: 5685 mm
  • mast lowered: 2685 mm | mast extended: 4534 mm | of overhead guard: 2575 mm | Seat relating to SIP: 2840 mm | Coupling: 860 mm

Specifications

  • 2025
  • HANGCHA
  • 4-Wheel Drive Rough Terrain 11,000-2,2000lbs
  • CPCD50-XW65E-RT2
  • Pneumatic
  • CPCD50-XW65E-RT2 | DEUTZ TCD 3.6 L4
  • According to DIN ISO 1585: 55.4/2300 kW/r/min
  • Diesel
  • 200/1500~1800 r/min
  • 4
  • 3620 cm3
  • 390/1300 N·m/r/min
  • EURO IIIB/Tier4F
  • 114x145mm
  • Manufacturer: DANA | Type: TE-30
  • 7760+J+F mm
  • 2×/2×
  • 445/65-22.5-18PR Pneumatic
  • 12.5/80-18-12PR Pneumatic
  • Service: Wet brake
  • Mechanical
  • 2-12/90 V/Ah
  • Vehicle electrical system voltage: 24 V
  • Travel speed, laden/unladen: 25/25 Km/h | Lift speed, laden/unladen: 0.45/0.52 m/s | Lowering, laden/unladen: 0.5/0.43 m/s
  • Drawbar pull, laden: 77000 N
  • 255 bar
  • Sound pressure level at the driver's seat: 78 Db
  • Load centre distance: 600 mm | Load distance, centre of drive axle to fork: 735 mm | Tread, front: 1660 mm | Tread, rear: 1760 mm | Tilt of mast/fork carriage forward/backward: 15/15° | Lift: 3000 mm | Free Lift: 170 mm | Fork dimensions ISO 2331: 60×150×1200 mm | Distance between fork-arms: 300-1950 mm | Gradeability, laden: 39% | Minimum pivoting point distance: 3040 mm
  • 2150 mm
  • mast lowered: 2685 mm | mast extended: 4534 mm | of overhead guard: 2575 mm | Seat relating to SIP: 2840 mm | Coupling: 860 mm
  • 4865 mm
  • to face of forks: 3665 mm
  • 2105 mm
  • Fork-Carriage: 1950 mm | Aisle: 5685 mm
  • Laden, below mast: 385 mm | Centre of wheelbase: 370 mm
  • 3550 mm
  • 5000 Kg | Axle loading, laden front/rear: 12300/1750 Kg | Axle loading, unladen front/rear: 4280/4770 Kg
  • Oil for attachments: 500 l/min
  • Fuel tank: 120 liter | Hydraulic Tank - (drain & refill): 115 liter
  • Service: 9050 Kg
  • Operator type: Seated | Stage FWD/RVS: 5/3 | Fork carriage DIN 15 173 --- ISO 2328, class/type A,B: IVB