2025 HANGCHA 4-Wheel Drive Rough Terrain 11,000-2,2000lbs CPCD100-XW70C-RT4

Information

2025 HANGCHA 4-Wheel Drive Rough Terrain 11,000-2,2000lbs CPCD100-XW70C-RT4

HANGCHA 11,000-22,000lbs rough terrain forklift with 4WD was developed on the basis of the XF series of Hangcha. It adopts the Deutz engine, which is powerful and reliable, easy to maintain; It can adapt to the rugged roads in the stone market, timber market, construction sites, etc., as well as the wet and slippery roads in rain and snow.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2025
  • HANGCHA
  • 4-Wheel Drive Rough Terrain 11,000-2,2000lbs CPCD100-XW70C-RT4
  • Manufacturer: DANA | Type: TE-30
  • Diesel
  • Available
  • Fork-Carriage: 2150 mm | Aisle: 8392 mm
  • mast lowered: 3290 mm | mast extended: 4735 mm | of overhead guard: 2575 mm | Seat relating to SIP: 2840 mm | Coupling: 860 mm

Specifications

  • 2025
  • HANGCHA
  • 4-Wheel Drive Rough Terrain 11,000-2,2000lbs
  • CPCD100-XW70C-RT4
  • Pneumatic
  • CPCD100-XW70C-RT4 | CUMMINS QSF3.8t3TC115
  • According to DIN ISO 1585: 86/2200 kW/r/min
  • Diesel
  • 200/1500~1800 r/min
  • 4
  • 3759 cm3
  • 500/1500 N·m/r/min
  • EURO IIIA/GB3
  • 114x145mm
  • Manufacturer: DANA | Type: TE-30
  • 7760+J+F mm
  • 2×/2×
  • 17.5-25-36PR Pneumatic
  • 385/55-24.5-18PR Pneumatic
  • Service: Wet brake
  • Mechanical
  • 2-12/90 V/Ah
  • Vehicle electrical system voltage: 24 V
  • Travel speed, laden/unladen: 24/24 Km/h | Lift speed, laden/unladen: 310/330 m/s | Lowering, laden/unladen: 0.46/0.39 m/s
  • Drawbar pull, laden: 88000/- N
  • 255 bar
  • Sound pressure level at the driver's seat: 78 Db
  • Load centre distance: 600 mm | Load distance, centre of drive axle to fork: 932 mm | Tread, front: 2095 mm | Tread, rear: 1900 mm | Tilt of mast/fork carriage forward/backward: 15/15° | Lift: 3000 mm | Free Lift: 200 mm | Fork dimensions ISO 2331: 80×160×1520 mm | Distance between fork-arms: 440-2150 mm | Gradeability, laden: 36/-% | Minimum pivoting point distance: 3040 mm
  • 2800 mm
  • mast lowered: 3290 mm | mast extended: 4735 mm | of overhead guard: 2575 mm | Seat relating to SIP: 2840 mm | Coupling: 860 mm
  • 6242 mm
  • to face of forks: 4722 mm
  • 2550 mm
  • Fork-Carriage: 2150 mm | Aisle: 8392 mm
  • Laden, below mast: 390 mm | Centre of wheelbase: 424 mm
  • 5740 mm
  • 10000 Kg | Axle loading, laden front/rear: 22520/2980 Kg | Axle loading, unladen front/rear: 6920/8580 Kg
  • Oil for attachments: 500 l/min
  • Fuel tank: 150 liter | Hydraulic Tank - (drain & refill): 160 liter
  • Service: 15500 Kg
  • Operator type: Seated | Stage FWD/RVS: 5/3 | Fork carriage DIN 15 173 --- ISO 2328, class/type A,B: B