Current HANGCHA Rough-Terrain-Forklift 4-Wheel Drive Rough Terrain 11,000-2,2000lbs

2025 HANGCHA 4-Wheel Drive Rough Terrain 11,000-2,2000lbs CPCD100-XH16C-RT4

2025 HANGCHA 4-Wheel Drive Rough Terrain 11,000-2,2000lbs CPCD100-XH16C-RT4

Swipe to View More

  • Year 2025
  • Make HANGCHA
  • Model 4-Wheel Drive Rough Terrain 11,000-2,2000lbs
Shop HANGCHA Pre-Owned
Product Details Specifications Photos
2025 HANGCHA 4-Wheel Drive Rough Terrain 11,000-2,2000lbs CPCD100-XH16C-RT4

2025 HANGCHA 4-Wheel Drive Rough Terrain 11,000-2,2000lbs CPCD100-XH16C-RT4

  • Year 2025
  • Manufacturer HANGCHA
  • Model Name 4-Wheel Drive Rough Terrain 11,000-2,2000lbs
  • Trim Name CPCD100-XH16C-RT4
  • Generic Type (Primary) Pneumatic
  • Engine Manufacturer CPCD100-XH16C-RT4 | CUMMINS F 3.8
  • Engine Power According to DIN ISO 1585: 90/2200 kW/r/min
  • Fuel Type Diesel
  • Rated Engine Speed 200/1500~1800 r/min
  • Cylinder Liners 4
  • Displacement 3759 cm3
  • Engine Torque 500/1500 N·m/r/min
  • Emissions EU stageV/EPA Tier 4F
  • Bore 114x145mm

2025 HANGCHA 4-Wheel Drive Rough Terrain 11,000-2,2000lbs CPCD100-XH16C-RT4

HANGCHA 11,000-22,000lbs rough terrain forklift with 4WD was developed on the basis of the XF series of Hangcha. It adopts the Deutz engine, which is powerful and reliable, easy to maintain; It can adapt to the rugged roads in the stone market, timber market, construction sites, etc., as well as the wet and slippery roads in rain and snow.

Engine

Engine Manufacturer CPCD100-XH16C-RT4 | CUMMINS F 3.8
Engine Power According to DIN ISO 1585: 90/2200 kW/r/min
Fuel Type Diesel
Rated Engine Speed 200/1500~1800 r/min
Cylinder Liners 4
Displacement 3759 cm3
Engine Torque 500/1500 N·m/r/min
Emissions EU stageV/EPA Tier 4F
Bore 114x145mm

Drivetrain

Transmission Manufacturer: DANA | Type: TE-30
Steering Angle, Right 7760+J+F mm

Wheels & Tires

Wheels 2×/2×
Tires, Front Specification 17.5-25-36PR Pneumatic
Tires, Rear Specification 385/55-24.5-18PR Pneumatic

Brakes

Brake System Type Service: Wet brake
Parking Brake Mechanical

Battery

Battery 2-12/90 V/Ah

Electric

Electrical Vehicle electrical system voltage: 24 V

Operational

Operating Speed Travel speed, laden/unladen: 24/24 Km/h | Lift speed, laden/unladen: 0.41/43 m/s | Lowering, laden/unladen: 0.46/0.39 m/s
Operating Conditions Drawbar pull, laden: 97000/- N
Maximum Pressure 255 bar

Performance

Noise Level Sound pressure level at the driver's seat: 78 Db

Dimensions

Dimensions Load centre distance: 600 mm | Load distance, centre of drive axle to fork: 932 mm | Tread, front: 2095 mm | Tread, rear: 1900 mm | Tilt of mast/fork carriage forward/backward: 15/15° | Lift: 3000 mm | Free Lift: 200 mm | Fork dimensions ISO 2331: 80×160×1520 mm | Distance between fork-arms: 440-2150 mm | Gradeability, laden: 41/-% | Minimum pivoting point distance: 3040 mm
Wheelbase 2800 mm
Height mast lowered: 3290 mm | mast extended: 4735 mm | of overhead guard: 2575 mm | Seat relating to SIP: 2840 mm | Coupling: 860 mm
Overall Length 6242 mm
Length to face of forks: 4722 mm
Overall Width 2550 mm
Width Fork-Carriage: 2150 mm | Aisle: 8392 mm
Ground Clearance Laden, below mast: 390 mm | Centre of wheelbase: 424 mm
Turning Radius 5740 mm

Capacities

Load Capacity, Land 10000 Kg | Axle loading, laden front/rear: 22520/2980 Kg | Axle loading, unladen front/rear: 6920/8580 Kg
Volume Oil for attachments: 500 l/min
Fuel Capacity Fuel tank: 120 liter | Hydraulic Tank - (drain & refill): 115 liter

Weights

Weight Service: 15500 Kg

Features

Features Operator type: Seated | Stage FWD/RVS: 5/3 | Fork carriage DIN 15 173 --- ISO 2328, class/type A,B: B

Product Photography