2025 HANGCHA 2WD&4WD Rough Terrain 3,000-3,500lbs CPCD15-XW97C-RT4

Information

2025 HANGCHA 2WD&4WD Rough Terrain 3,000-3,500lbs CPCD15-XW97C-RT4

The multipurpose concept refers to the capability of the forklift truck to work in many different areas, with a great performance no matter how hard the conditions are. We studied all the specifications of the best forklifts in the world, specialized in industrial and rough terrain types, determining the characteristics that makes a forklift work well in an industrial environment. After that, we combined such information, to prepare the basis of the design of our product.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2025
  • HANGCHA
  • 2WD&4WD Rough Terrain 3,000-3,500lbs CPCD15-XW97C-RT4
  • Manufacturer: DANA | Type: TE-30
  • Diesel
  • Available
  • Fork-Carriage: 1150 mm | Aisle for pallets 800 x 1200 lengthways: 5110 mm
  • mast lowered: 2165 mm | mast extended: 4031 mm | of overhead cabin: 2200 mm | Seat relating to SIP: 2840 mm | Coupling: 860 mm

Specifications

  • 2025
  • HANGCHA
  • 2WD&4WD Rough Terrain 3,000-3,500lbs
  • CPCD15-XW97C-RT4
  • Pneumatic
  • CPCD15-XW97C-RT4 | KUBOTA V2607-CR-E5B
  • According to DIN ISO 1585: 37.4/2400 kW/r/min
  • Diesel
  • 171.5/1500 r/min
  • 4
  • 2615 cm3
  • 1674/1400 N·m/r/min
  • StageIIIA/Tier3
  • 114x145mm
  • Manufacturer: DANA | Type: TE-30
  • 7760+J+F mm
  • 2x/2x
  • 12-16.5-14PR Pneumatic
  • 10.0/75-15.3-12PR Pneumatic
  • Service: Hydraulic
  • Mechanical
  • 12/90 V/Ah
  • Vehicle electrical system voltage: 24 V
  • Travel speed, laden/unladen: 23/25 Km/h | Lift speed, laden/unladen: 0.620/0.640 m/s | Lowering, laden/unladen: 0.500/0.450 m/s
  • Drawbar pull, laden: 31000 N
  • 255 bar
  • Sound pressure level at the driver's seat: 78 Db
  • Load centre distance: 500 mm | Load distance, centre of drive axle to fork: 510 mm | Tread, front: 1140 mm | Tread, rear: 1186 mm | Tilt of mast/fork carriage forward/backward: 10/12° | Lift: 3000 mm | Free Lift: 155 mm | Fork dimensions: 35×100×1070 mm | Distance between fork-arms: 200-1150 mm | Gradeability, laden: 60% | Minimum pivoting point distance: 3040 mm
  • 1880 mm
  • mast lowered: 2165 mm | mast extended: 4031 mm | of overhead cabin: 2200 mm | Seat relating to SIP: 2840 mm | Coupling: 860 mm
  • 4120 mm
  • to face of forks: 3050 mm
  • 1450 mm
  • Fork-Carriage: 1150 mm | Aisle for pallets 800 x 1200 lengthways: 5110 mm
  • Laden, below mast: 235 mm | Centre of wheelbase: 280 mm
  • 3200 mm
  • 1500 Kg
  • Oil for attachments: 500 l/min
  • Fuel tank: 60 liter | Hydraulic Tank - (drain & refill): 60 liter
  • Service: 3900 Kg | Axle loading, laden front/rear: 4450/950 Kg | Axle loading, unladen front/rear: 1750/2150 Kg
  • Operator type: Seated | Stage FWD/RVS: 5/3 | Fork carriage DIN 15 173 --- ISO 2328, class/type A,B: B