2025 HANGCHA XF2 series Pneumatic Forklift 3000-7000lbs CPQYD35-X2H22F1/B1

Information

2025 HANGCHA XF2 series Pneumatic Forklift 3000-7000lbs CPQYD35-X2H22F1/B1

XF2 Series IC Counterbalanced Trucks

Appearance

A vivid and sturdy exterior inheriting the classic design, embodying innovative ideas, and bringing a strong high-tech impact.

Safe

FOR HIGH PERFORMANCE DURING WORKING The vehicle has a low center of gravity design and optimized operating vision. (small counterweight design, backward tilting counterweight design, optimized triplex mast design).

OPS system is provided for the standard configuration and optionally an adjustable speed limit range of several segments is provided.

Mast

Can be easily installed with J-hooks through a simple process.

Features may include:

  • In this system, the engine drives a hydraulic pump and the pressure is transferred to a hydraulic motor mounted on the drive axle, then the motor outputs traction to the drive wheels via a gear reducer and a differential.
  • As this system has no clutch to be used by the hydraulic transmission forklift truck, it does not cause heat loss and wear from inching operation, minimizing transmission losses and reducing fuel consumption.
  • The hydrostatic drive system will automatically brake when the accelerator is released, leading to less wear and tear on the brake and tyres, and longer service life.
  • Equipped with the adjustable speed setting and turning deceleration function, driving safety can be ensured from all aspects.
  • Three operating modes (E, N, S) are freely selectable, providing simple and precise control and allowing optimal working efficiency in a wide range of operating conditions.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2025
  • HANGCHA
  • XF2 series Pneumatic Forklift 3000-7000lbs CPQYD35-X2H22F1/B1
  • Type: Power shift | CHINA/OKAMURA
  • LPG/GAS
  • Available
  • Fork-Carriage: 1100 mm | Aisle for pallets 1000 x 1200 crossways: 4097.5 mm | Aisle for pallets 800 x 1200 Lengthways: 4297.5
  • Mast Lowered: 2155 mm | Mast Extended: 4145 mm | Of Overhead Guard: 2180

Specifications

  • 2025
  • HANGCHA
  • XF2 series Pneumatic Forklift 3000-7000lbs
  • CPQYD35-X2H22F1/B1
  • Pneumatic
  • GCT GK25 DUAL
  • LP: 190 N·m /2000 r /G: 175/2000 min
  • Type: Power shift | CHINA/OKAMURA
  • CARB Tier3/ EPA Tier2/ EU StageV
  • 89×100 mm
  • Engine power according to DIN ISO 1585: LP: 47/G: 44.5 kw
  • LPG/GAS
  • 28×9-15-14PR/2 Pneumatic
  • 6.50-10-10PR/2 Pneumatic
  • 12 V /60Ah
  • Rated speed: 2700 min |Travel, laden/unladen: 19/20 km/h | Lift, laden/unladen: 0.45/0.48 m/s | Lowering, laden/unladen: 0.45/0.50 m/s
  • Drawbar pull, laden/unladen: 19300/14000 N
  • Operating: 160 bar
  • Load centre distance: 500 mm | Load distance, centre of drive axle to fork: 482.5 mm | Tread, Front: 1005 mm | Tread, Rear: 975 mm | Tilt of mast/fork carriage forward/backward: 6/11° | Free lift: 150 mm | Lift: 3000 mm | Fork: 50×122×1070 mm | Distance Between Fork-Arms: 244-1038 mm | Gradeability, laden/unladen: 20/22 %
  • 1700 mm
  • Mast Lowered: 2155 mm | Mast Extended: 4145 mm | Of Overhead Guard: 2180
  • To Face Of Forks: 2782.5 mm
  • 1225 mm
  • Fork-Carriage: 1100 mm | Aisle for pallets 1000 x 1200 crossways: 4097.5 mm | Aisle for pallets 800 x 1200 Lengthways: 4297.5
  • Laden, Below Mast: 130 mm | Centre Of Wheelbase: 165 mm
  • 2415 mm
  • Rated: 3500 kg
  • Loading Laden: 7155 kg | Loading Unladen: 1100 kg
  • Loading Laden: 1620 kg | Loading Unladen: 3135 kg
  • LP: 35/G: 50
  • Service: 4755 kg
  • Rear overhang 535 mm
  • 1 FWD /1 RVS /