2025 HANGCHA XF2 series Pneumatic Forklift 3000-7000lbs CPQYD15-X2H24F1/B1

Information

2025 HANGCHA XF2 series Pneumatic Forklift 3000-7000lbs CPQYD15-X2H24F1/B1

XF2 Series IC Counterbalanced Trucks

Appearance

A vivid and sturdy exterior inheriting the classic design, embodying innovative ideas, and bringing a strong high-tech impact.

Safe

FOR HIGH PERFORMANCE DURING WORKING The vehicle has a low center of gravity design and optimized operating vision. (small counterweight design, backward tilting counterweight design, optimized triplex mast design).

OPS system is provided for the standard configuration and optionally an adjustable speed limit range of several segments is provided.

Mast

Can be easily installed with J-hooks through a simple process.

Features may include:

  • In this system, the engine drives a hydraulic pump and the pressure is transferred to a hydraulic motor mounted on the drive axle, then the motor outputs traction to the drive wheels via a gear reducer and a differential.
  • As this system has no clutch to be used by the hydraulic transmission forklift truck, it does not cause heat loss and wear from inching operation, minimizing transmission losses and reducing fuel consumption.
  • The hydrostatic drive system will automatically brake when the accelerator is released, leading to less wear and tear on the brake and tyres, and longer service life.
  • Equipped with the adjustable speed setting and turning deceleration function, driving safety can be ensured from all aspects.
  • Three operating modes (E, N, S) are freely selectable, providing simple and precise control and allowing optimal working efficiency in a wide range of operating conditions.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2025
  • HANGCHA
  • XF2 series Pneumatic Forklift 3000-7000lbs CPQYD15-X2H24F1/B1
  • Type: Power shift | CHINA/OKAMURA
  • LPG/GAS
  • Available
  • Fork-Carriage: 1000 mm | Aisle for pallets 1000 x 1200 crossways: 3595 mm | Aisle for pallets 800 x 1200 Lengthways: 3795 mm
  • Mast Lowered: 1995 mm | Mast Extended: 3958 mm | Of Overhead Guard: 2155 mm

Specifications

  • 2025
  • HANGCHA
  • XF2 series Pneumatic Forklift 3000-7000lbs
  • CPQYD15-X2H24F1/B1
  • Pneumatic
  • CPQYD15-X2H24F1/B1 | GCT GK21 DUAL
  • LP: 161/2000/G: 153/2000 N·m/r/min
  • Type: Power shift | CHINA/OKAMURA
  • 89 mm
  • 83 mm
  • 4
  • 2065 cm3
  • Engine power according to DIN ISO 1585: LP: 43/G: 40 kw
  • LPG/GAS
  • 6.50-10-10 PR/2 Pneumatic
  • 5.00-8-10PR/2 Pneumatic
  • 12 V /60Ah
  • Rated speed: 2700 min |Travel, laden/unladen: 20/21 km/h | Lift, laden/unladen: 0.65/0.68 m/s | Lowering, laden/unladen: 0.45/0.50 m/s
  • Drawbar pull, laden/unladen: 15600/10000 N
  • Operating: 160 bar
  • Load centre distance: 500 mm | Load distance, centre of drive axle to fork: 405 mm | Tread, Front: 920 mm | Tread, Rear: 940 mm | Tilt of mast/fork carriage forward/backward: 6/11° | Free lift: 155 mm | Lift: 3000 mm | Fork: 35×100×920 mm | Distance Between Fork-Arms: 200-1000 mm | Gradeability, laden/unladen: 24/25 %
  • 1475 mm
  • Mast Lowered: 1995 mm | Mast Extended: 3958 mm | Of Overhead Guard: 2155 mm
  • To Face Of Forks: 2285 mm
  • 1110 mm
  • Fork-Carriage: 1000 mm | Aisle for pallets 1000 x 1200 crossways: 3595 mm | Aisle for pallets 800 x 1200 Lengthways: 3795 mm
  • Laden, Below Mast: 115 mm | Centre Of Wheelbase: 150 mm
  • 1990 mm
  • Rated: 1500 kg
  • Loading Laden: 3700 kg | Loading Unladen: 1280 kg
  • Loading Laden: 550 kg | Loading Unladen: 1470 kg
  • LP: 35/G: 50 liter
  • Service: 2750 kg
  • Rear overhang 405 mm
  • 1 FWD /1 RVS /