2025 HANGCHA XF2 series Pneumatic Forklift 3000-7000lbs CPCD18-X2H7F1/B1

Information

2025 HANGCHA XF2 series Pneumatic Forklift 3000-7000lbs CPCD18-X2H7F1/B1

XF2 Series IC Counterbalanced Trucks

Appearance

A vivid and sturdy exterior inheriting the classic design, embodying innovative ideas, and bringing a strong high-tech impact.

Safe

FOR HIGH PERFORMANCE DURING WORKING The vehicle has a low center of gravity design and optimized operating vision. (small counterweight design, backward tilting counterweight design, optimized triplex mast design).

OPS system is provided for the standard configuration and optionally an adjustable speed limit range of several segments is provided.

Mast

Can be easily installed with J-hooks through a simple process.

Features may include:

  • In this system, the engine drives a hydraulic pump and the pressure is transferred to a hydraulic motor mounted on the drive axle, then the motor outputs traction to the drive wheels via a gear reducer and a differential.
  • As this system has no clutch to be used by the hydraulic transmission forklift truck, it does not cause heat loss and wear from inching operation, minimizing transmission losses and reducing fuel consumption.
  • The hydrostatic drive system will automatically brake when the accelerator is released, leading to less wear and tear on the brake and tyres, and longer service life.
  • Equipped with the adjustable speed setting and turning deceleration function, driving safety can be ensured from all aspects.
  • Three operating modes (E, N, S) are freely selectable, providing simple and precise control and allowing optimal working efficiency in a wide range of operating conditions.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2025
  • HANGCHA
  • XF2 series Pneumatic Forklift 3000-7000lbs CPCD18-X2H7F1/B1
  • 60 A
  • CHINA/OKAMURA | Power shift
  • Diesel
  • Available
  • Fork-carriage: 1000 mm | Aisle width for pallets 1000 x 1200 crossways: 3620 mm | Aisle width for pallets 800 x 1200 lengthways: 3820 mm | Minimum pivoting point distance: 1480 mm
  • mast lowered: 1995 mm | mast extended: 3958 mm | of overhead guard: 2155 mm | Seat relating to SIP: 1965 mm | Coupling: 635 mm

Specifications

  • 2025
  • HANGCHA
  • XF2 series Pneumatic Forklift 3000-7000lbs
  • CPCD18-X2H7F1/B1
  • Pneumatic
  • CPCD18-X2H7F1/B1 | XINCHAI 3E22YG51P464
  • EU StageV
  • according to DIN ISO 1585: 34 Kw
  • Diesel
  • 2400 r/min
  • 150/1600-1800 N·m/r/min
  • 4
  • 2227 cm3
  • 94 mm
  • 107 mm
  • CHINA/OKAMURA | Power shift
  • FWD/RVS 1/1
  • Pneumatic 2
  • 6.50-10-10 PR/2
  • 5.00-8-10PR/2
  • spring applied, hydraulic release multi-disc brake
  • Mechanical
  • 60 A
  • 24 V
  • 12/90 V/Ah
  • Travel speed, laden/unladen: 19/20 km/h | Lift speed, laden/unladen: 0.62/0.68 m/s | Lowering speed, laden/unladen: 0.45/0.50 m/s
  • Drawbar pull, laden/unladen: 14000/10000 N
  • 160 bar
  • Load centre distance: 500 mm | Load distance, centre of drive axle to fork: 410 mm | Rear overhang: 430 mm | Tread, front: 920 mm | Tread, rear: 940 mm | Tilt of mast/fork carriage forward/backward: 6/11° | Free Lift: 155 mm | Lift: 3000 mm | Fork dimensions: 35×100×920 mm | Distance between fork-arms: 200-1000 mm | Gradeability, laden/unladen: 22/25%
  • 1475 mm
  • mast lowered: 1995 mm | mast extended: 3958 mm | of overhead guard: 2155 mm | Seat relating to SIP: 1965 mm | Coupling: 635 mm
  • 6930 mm
  • to face of forks: 2285 mm
  • 1110 mm
  • Fork-carriage: 1000 mm | Aisle width for pallets 1000 x 1200 crossways: 3620 mm | Aisle width for pallets 800 x 1200 lengthways: 3820 mm | Minimum pivoting point distance: 1480 mm
  • laden, below mast: 115 mm | centre of wheelbase: 150 mm
  • 2010 mm
  • 1750 kg
  • Loading, laden: 4110 kg | Loading, unladen: 1280 kg
  • Loading, laden: 540 kg | Loading, unladen: 1620 kg
  • 50 liter
  • Oil for attachments: 110 l/min
  • Service: 2900 kg
  • Operator type: Seated | Towing coupling,type DIN 15170: Pin