2025 HANGCHA Large Pneumatic Forklift 17,500-22,000lbs CPCD80-XW96G
- Year 2025
- Make HANGCHA
- Model Large Pneumatic Forklift 17,500-22,000lbs
2025 HANGCHA Large Pneumatic Forklift 17,500-22,000lbs CPCD80-XW96G
2025 HANGCHA Large Pneumatic Forklift 17,500-22,000lbs CPCD80-XW96G
In developing the XF 17500-22000lbs series,comfort and easy operation is always considered, for example, inproved vibrating levels, compound engine damper and full floationg seat and cabin are applied. Comfortable also contribute to increased productivity. The extra foot space is provided to reduce operator fatigue significantly. The new wide-open, non-slip step makes getting in and out easy and safe.
Engine
Engine Manufacturer
CPCD80-XW96G | TCD 3.6 L4
Emissions
Stage V/T4f
Engine Power
85 Kw
Fuel Type
Diesel
Rated Engine Speed
2200 r/min
Cylinder Liners
4
Displacement
3621 cm3
Drivetrain
Transmission
OKAMURA Powershift
Stages
FWD/RVS 4x/2
Wheels & Tires
Wheels
Pneumatic 2
Tires, Front Specification
9.00-20-14PR
Tires, Rear Specification
9.00-20-14PR
Brakes
Brake System Type
Wet brake
Parking Brake
Mechanical
Electric
Generator
60 A
Electrical
12 V
Battery
Battery
12/105 V/Ah
Operational
Operating Speed
Travel speed, laden/unladen: -/28.5 km/h | Lift speed, laden/unladen: 0.390/- m/s | Lowering speed, laden/unladen: 0.455/- m/s
Operating Conditions
Drawbar pull, laden/unladen: 65000/45000 N
Maximum Pressure
195 bar
Dimensions
Dimensions
Load centre distance: 600 mm | Load distance, centre of drive axle to fork: 714 mm | Rear overhang: 595 mm | Tread, front: 1628 mm | Tread, rear: 1700 mm | Tilt of mast/fork carriage forward/backward: 6/12° | Free lift: 200 mm | Lift: 3000 mm | Fork dimensions: 75x160x1520 mm | Distance between fork-arms: 310~1200 mm | Gradeability, laden/unladen: >20/-%
Wheelbase
2600 mm
Height
mast lowered: 2700 mm | mast extended: 4215 mm | of overhead guard: 2580 mm | Seat: 1505 mm | Coupling: 505 mm
Overall Length
5404 mm
Length
to face of forks: 4004 mm
Overall Width
2165 mm
Width
Fork-carriage: 2000 mm | Aisle width for pallets 1000 x 1200 crossways: 5644 mm | Aisle width for pallets 800 x 1200 lengthways: 5844 mm | Min. right angle stacking aisle width(Ast): 3490 mm
Ground Clearance
laden, mast: 250 mm | centre of wheelbase: 339 mm
Turning Radius
3730 mm | Internal: 1350 mm
Capacities
Load Capacity, Land
8000 kg
Axle Capacity, Front
Loading, laden: 17980 kg | Loading, unladen: 4820 kg
Axle Capacity, Rear
Loading, laden: 2020 kg | Loading, unladen: 7180 kg
Hydraulic Capacity
90 gal
Fuel Capacity
90 gal
Volume
Oil for attachments: 155 l/min
Weights
Weight
Service: 12000 kg
Features
Features
Operator type: Seated | Towing coupling,type DIN 15170: Pin