2025 HANGCHA Large Pneumatic Forklift 17,500-22,000lbs CPCD80-XH16B

Information

2025 HANGCHA Large Pneumatic Forklift 17,500-22,000lbs CPCD80-XH16B

In developing the XF 17500-22000lbs series,comfort and easy operation is always considered, for example, inproved vibrating levels, compound engine damper and full floationg seat and cabin are applied. Comfortable also contribute to increased productivity. The extra foot space is provided to reduce operator fatigue significantly. The new wide-open, non-slip step makes getting in and out easy and safe.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2025
  • HANGCHA
  • Large Pneumatic Forklift 17,500-22,000lbs CPCD80-XH16B
  • 60 A
  • OKAMURA Powershift
  • Diesel
  • Available
  • Fork-carriage: 2000 mm | Aisle width for pallets 1000 x 1200 crossways: 5544 mm | Aisle width for pallets 800 x 1200 lengthways: 5744 mm | Min. right angle stacking aisle width(Ast): 3490 mm
  • mast lowered: 2700 mm | mast extended: 4215 mm | of overhead guard: 2580 mm | Seat: 1505 mm | Coupling: 505 mm

Specifications

  • 2025
  • HANGCHA
  • Large Pneumatic Forklift 17,500-22,000lbs
  • CPCD80-XH16B
  • Pneumatic
  • CPCD80-XH16B | F3.8
  • Stage V/T4f
  • 90 Kw
  • Diesel
  • 2200 r/min
  • 4
  • 3759 cm3
  • OKAMURA Powershift
  • FWD/RVS 4x/2
  • Pneumatic 2
  • 9.00-20-14PR
  • 9.00-20-14PR
  • Wet brake
  • Mechanical
  • 60 A
  • 12 V
  • 12/105 V/Ah
  • Travel speed, laden/unladen: -/28.5 km/h | Lift speed, laden/unladen: 0.440/- m/s | Lowering speed, laden/unladen: 0.455/- m/s
  • Drawbar pull, laden/unladen: 65000/45000 N
  • 195 bar
  • Load centre distance: 600 mm | Load distance, centre of drive axle to fork: 714 mm | Rear overhang: 595 mm | Tread, front: 1628 mm | Tread, rear: 1700 mm | Tilt of mast/fork carriage forward/backward: 6/12° | Free lift: 200 mm | Lift: 3000 mm | Fork dimensions: 75x160x1520 mm | Distance between fork-arms: 310~1200 mm | Gradeability, laden/unladen: >20/-%
  • 2500 mm
  • mast lowered: 2700 mm | mast extended: 4215 mm | of overhead guard: 2580 mm | Seat: 1505 mm | Coupling: 505 mm
  • 5404 mm
  • to face of forks: 3904 mm
  • 2165 mm
  • Fork-carriage: 2000 mm | Aisle width for pallets 1000 x 1200 crossways: 5544 mm | Aisle width for pallets 800 x 1200 lengthways: 5744 mm | Min. right angle stacking aisle width(Ast): 3490 mm
  • laden, mast: 250 mm | centre of wheelbase: 339 mm
  • 3630 mm | Internal: 1327 mm
  • 8000 kg
  • Loading, laden: 17980 kg | Loading, unladen: 4820 kg
  • Loading, laden: 2020 kg | Loading, unladen: 7180 kg
  • 90 gal
  • 90 gal
  • Oil for attachments: 180 l/min
  • Service: 12000 kg
  • Operator type: Seated | Towing coupling,type DIN 15170: Pin