2025 HANGCHA Large Pneumatic Forklift 17,500-22,000lbs CPCD100-XH15B

Information

2025 HANGCHA Large Pneumatic Forklift 17,500-22,000lbs CPCD100-XH15B

In developing the XF 17500-22000lbs series,comfort and easy operation is always considered, for example, inproved vibrating levels, compound engine damper and full floationg seat and cabin are applied. Comfortable also contribute to increased productivity. The extra foot space is provided to reduce operator fatigue significantly. The new wide-open, non-slip step makes getting in and out easy and safe.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2025
  • HANGCHA
  • Large Pneumatic Forklift 17,500-22,000lbs CPCD100-XH15B
  • 60 A
  • OKAMURA Powershift
  • Diesel
  • Available
  • Fork-carriage: 2000 mm | Aisle width for pallets 1000 x 1200 crossways: 5866 mm | Aisle width for pallets 800 x 1200 lengthways: 6066 mm | Min. right angle stacking aisle width(Ast): 3490 mm
  • mast lowered: 2850 mm | mast extended: 4555 mm | of overhead guard: 2580 mm | Seat: 1505 mm | Coupling: 505 mm

Specifications

  • 2025
  • HANGCHA
  • Large Pneumatic Forklift 17,500-22,000lbs
  • CPCD100-XH15B
  • Pneumatic
  • CPCD100-XH15B | YCA05115-S500
  • Stage V
  • 85 Kw
  • Diesel
  • 2200 r/min
  • 4
  • 4837 cm3
  • OKAMURA Powershift
  • FWD/RVS 4x/2
  • Pneumatic 2
  • 9.00-20-14PR
  • 9.00-20-14PR
  • Wet brake
  • Mechanical
  • 60 A
  • 12 V
  • 12/105 V/Ah
  • Travel speed, laden/unladen: -/28.5 km/h | Lift speed, laden/unladen: 0.330/- m/s | Lowering speed, laden/unladen: 0.455/- m/s
  • Drawbar pull, laden/unladen: 65000/49000 N
  • 195 bar
  • Load centre distance: 600 mm | Load distance, centre of drive axle to fork: 726 mm | Rear overhang: 595 mm | Tread, front: 1628 mm | Tread, rear: 1700 mm | Tilt of mast/fork carriage forward/backward: 6/12° | Free lift: 200 mm | Lift: 3000 mm | Fork dimensions: 80x160x1520 mm | Distance between fork-arms: 310~1200 mm | Gradeability, laden/unladen: >20/-%
  • 2800 mm
  • mast lowered: 2850 mm | mast extended: 4555 mm | of overhead guard: 2580 mm | Seat: 1505 mm | Coupling: 505 mm
  • 5736 mm
  • to face of forks: 4236 mm
  • 2165 mm
  • Fork-carriage: 2000 mm | Aisle width for pallets 1000 x 1200 crossways: 5866 mm | Aisle width for pallets 800 x 1200 lengthways: 6066 mm | Min. right angle stacking aisle width(Ast): 3490 mm
  • laden, mast: 250 mm | centre of wheelbase: 339 mm
  • 3940 mm | Internal: 1396 mm
  • 10000 kg
  • Loading, laden: 21515 kg | Loading, unladen: 6430 kg
  • Loading, laden: 2285 kg | Loading, unladen: 7370 kg
  • 90 gal
  • 90 gal
  • Oil for attachments: 180 l/min
  • Service: 13800 kg
  • Operator type: Seated | Towing coupling,type DIN 15170: Pin