2025 HANGCHA High Capacity Forklift 80,000-105,000lbs CPCD480-W61

Information

2025 HANGCHA High Capacity Forklift 80,000-105,000lbs CPCD480-W61

Heavy IC Forklift Truck

Features may include:

  • DANA TE30 new type gear box, CUMMINS QSM11 3A emission engine and KESSLER D102 heavy-load driving axle are utilized. The key parts are internationally well-known brand products of which the quality is stable and durable.
  • Equipped with seat operating presence sensing (OPS) system to improve safety; The controller area network (CAN) bus LCD display is applicable, which has the function of built-in weight display, fault diagnosis and chinese-english display query system.
  • The independent dynamic braking oil circuit system can reduce the complexity of hydraulic system and oil cost.
  • With the load sensing variable main hydraulic system, the non-working energy consumption is very small.
  • Equipped with electronic automatic shift 5F/3R gearbox, make the power strong, start fast and smooth; Integral cab, transparent visual field, good sealing.
  • With integrated and multi-functional operating handle and electro-hydraulic proportional control, easy to lift, tilt and operate. With
  • LUDV main control multiple-way valve, it can realize fast response, precise operation and achieve fine repeatability.
  • For engine revolution handle, following control is applicable to reduce the operator’s load. Centralized fault warning is concise and clear, reducing driver tension.
  • With the centralized pressure test point, convenient opening of the body cover, hood and manual tilting of the cab for easy maintenance.
  • Equipped with FIMS cloud intelligent forklift truck management system, remote intelligent monitoring, better promote equipment management and logistics management.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2025
  • HANGCHA
  • High Capacity Forklift 80,000-105,000lbs CPCD480-W61
  • Manufacturer: DANA | Type: TE-30
  • Diesel
  • Available
  • Fork-Carriage: 3500 mm | Aisle with load length 2400mm: 12340 mm
  • mast lowered: 5000 mm | mast extended: 7000 mm | of overhead cabin: 3920 mm | Seat relating to SIP: 2840 mm | Coupling: 860 mm

Specifications

  • 2025
  • HANGCHA
  • High Capacity Forklift 80,000-105,000lbs
  • CPCD480-W61
  • Pneumatic
  • CUMMINS/QSM11-CT3 | CPCD480-W61
  • 250 Kw
  • Diesel
  • 2100 r/min
  • 6
  • 10800 cm
  • 1674/1400 N·m/r/min
  • StageIIIA/Tier3
  • 114x145mm
  • Manufacturer: DANA | Type: TE-30
  • 7760+J+F mm
  • 4×/2
  • 18.00-25-40PR Pneumatic
  • 18.00-25-40PR Pneumatic
  • Service: Hydraulic control, wet multiplate type
  • Electromagnetic hydraulic control, clamp type
  • 2×12/120 V/Ah
  • Vehicle electrical system voltage: 24 V
  • Travel speed, laden/unladen: 22/27 Km/h | Lift speed, laden/unladen: 0.26/0.30 m/s | Lowering, laden/unladen: 0.44/0.40 m/s
  • Drawbar pull, laden/unladen: 370000/-N
  • 255 bar
  • Sound pressure level at the driver's seat: 78 Db
  • Load centre distance: 1200 mm | Load distance, centre of drive axle to fork: 1300 mm | Tread, front: 3050 mm | Tread, rear: 2750 mm | Tilt of mast/fork carriage forward/backward: 6/10° | Lift: 4000 mm | Free Lift: 130 mm | Fork dimensions: 130×300×2440 mm | Distance between fork-arms: 1050/3000 mm | Gradeability, laden/unladen: 25/-% | Minimum pivoting point distance: 3040 mm
  • 5500 mm
  • mast lowered: 5000 mm | mast extended: 7000 mm | of overhead cabin: 3920 mm | Seat relating to SIP: 2840 mm | Coupling: 860 mm
  • 10360 mm
  • to face of forks: 7920 mm
  • 3420 mm
  • Fork-Carriage: 3500 mm | Aisle with load length 2400mm: 12340 mm
  • Laden, below mast: 320 mm | Centre of wheelbase: 370 mm
  • 7600 mm
  • 48000 Kg
  • Oil for attachments: 500 l/min
  • Fuel tank: 650 liter | Hydraulic Tank - (drain & refill): 650 liter
  • Service: 62500 Kg
  • Operator type: Seated | Stage FWD/RVS: 5/3