2025 HANGCHA High Capacity Forklift 26,000-35,000lbs CPCD120-XRXH13B

Information

2025 HANGCHA High Capacity Forklift 26,000-35,000lbs CPCD120-XRXH13B

Okamura Transmission, multi-stage torque converter, big converter ratio, wide range of auto-adjust speed; stable and smooth shift, 2 stage forward and 1 stage backward, easy operation and maintenance. Full suspension overhead guard connected the chassis with 4 pivots using the rubber;Tilted structure is easy for maintenance; Smaller column and steering wheel increase the operator space.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2025
  • HANGCHA
  • High Capacity Forklift 26,000-35,000lbs CPCD120-XRXH13B
  • 60 A
  • OKAMURA Y63270X
  • Diesel
  • Available
  • Fork-carriage: 2370 mm | Aisle width with load length 1500mm: 6800 mm | Aisle width with load length 1800mm: 7100 mm | Minimum pivoting point distance: 1480 mm
  • mast lowered: 3180 mm | mast extended: 4695 mm | of overhead guard: 3265 mm | Seat relating to SIP: 1930 mm | Coupling: 600 mm

Specifications

  • 2025
  • HANGCHA
  • High Capacity Forklift 26,000-35,000lbs
  • CPCD120-XRXH13B
  • Pneumatic
  • CPCD120-XRXH13B | B6.7
  • Stage V/Tier 4
  • 116 Kw
  • Diesel
  • 2200 r/min
  • 746/1300 N·m/r/min
  • 6
  • 6700 cm3
  • OKAMURA Y63270X
  • FWD/RVS 2/1
  • Pneumatic 2
  • 10.00-20-14PR
  • 10.00-20-14PR
  • spring applied, hydraulic release multi-disc brake
  • Mechanical
  • 60 A
  • 24 V
  • 2×12/120 V/Ah
  • Travel speed, laden/unladen: 24/28 km/h | Lift speed, laden/unladen: 0.34/0.36 m/s | Lowering speed, laden/unladen: 0.45/0.40 m/s
  • Drawbar pull, laden/unladen: 115000 N
  • 15 mpa
  • Sound pressure at the driver´s seat: 78 dB (A)
  • Load centre distance: 600 mm | Load distance, centre of drive axle to fork: 745 mm | Rear overhang: 595 mm | Tread, front: 1780 mm | Tread, rear: 1890 mm | Tilt of mast/fork carriage forward/backward: 6/12° | Lift: 3000 mm | Fork dimensions: 80×200×1520 mm | Distance between fork-arms: 520/2200 mm | Gradeability, laden/unladen: 20%
  • 3100 mm
  • mast lowered: 3180 mm | mast extended: 4695 mm | of overhead guard: 3265 mm | Seat relating to SIP: 1930 mm | Coupling: 600 mm
  • 6190 mm
  • to face of forks: 4690 mm
  • 2460/2200 mm
  • Fork-carriage: 2370 mm | Aisle width with load length 1500mm: 6800 mm | Aisle width with load length 1800mm: 7100 mm | Minimum pivoting point distance: 1480 mm
  • laden, below mast: 250 mm | centre of wheelbase: 310 mm
  • 4350 mm | Internal: 1396 mm
  • 12000 kg
  • Loading, laden: 24520 kg | Loading, unladen: 6400 kg
  • Loading, laden: 2280 kg | Loading, unladen: 8400 kg
  • 320 liter
  • 320 liter
  • Oil for attachments: 110 l/min
  • Service: 16000 kg
  • Operator type: Seated | Towing coupling,type DIN 15170: Pin