2025 HANGCHA Compact Pneumatic Forklift 5,000lbs FP25CP

Information

2025 HANGCHA Compact Pneumatic Forklift 5,000lbs FP25CP

XF series compact pneumatic tire forklift is developed on basis of existing XF series by Hangcha, with world-leading technologies, forklift that can meet your demand in all dimensions thanks to the overall upgrading in appearance modeling, energy conservation and environmental protection, comfort, safety, and reliability.The dimension is close to the cushion tire truck. The pneumatic tires provides better passability, it can work in indoor and outdoor.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2025
  • HANGCHA
  • Compact Pneumatic Forklift 5,000lbs FP25CP
  • 12 V
  • Hangcha Powershift
  • LP
  • Available
  • Backrest: 43 in (1094 mm) | Fork-carriage: 40.9 in (1038 mm) | Aisle width for pallets 39.4" x 47.3" crossways: 142.4 in (3617 mm) | Aisle width for pallets 31.5" x 47.3" lengthways: 150.3 in (3817 mm)
  • mast lowered: 77.6 in (1970 mm) | mast extended: 159.3 in (4046 mm) | of overhead guard: 85.2 in (2165 mm) | Seat height relating to SIP: 41.7 in (1060 mm) | Coupling: 11.8 in (300 mm)

Specifications

  • 2025
  • HANGCHA
  • Compact Pneumatic Forklift 5,000lbs
  • FP25CP
  • Pneumatic
  • CPYD25-XH21B1-JC | GCT GK25 LPG CERT
  • 63 hp (47 kW)
  • LP
  • 2700 r/min
  • 4
  • 2488 cm3
  • 190/1600 N·m/r/min
  • Hangcha Powershift
  • FWD/RVS 1/1
  • Solid 2×/2
  • 21×8-9
  • 18×7-8
  • Hydraulic
  • Mechnical
  • 12 V
  • 12 V
  • 12/60 V/Ah
  • Travel speed, laden/unladen: 10.9/11.5 mph (17.5/18.5 km/h) | Lift speed, laden/unladen: 122/128 ft/min (0.62/0.65 m/s) | Lowering speed, laden/unladen: 88.6/98.4 ft/min (0.45/0.50 m/s)
  • Drawbar pull, laden/unladen: 23000/9000 N
  • 2538 psi (17.5 MPa)
  • Load centre distance: 24 in (600 mm) | Load distance, centre of drive axle to fork: 16.8 in (427 mm) | Tread, front: 38.9 in (985 mm) | Tread, rear: 36.6 in (930 mm) | Tilt of mast/fork carriage forward/backward: 6/8 ° | Free lift: 5.5 in (140 mm) | Lift: 118.1 in (3000 mm) | Fork dimensions: 1.6×4.8×42 in (40×122×1070 mm) | Distance between fork-arms: 8.9-39.7 in (226-1008 mm) | Minimum plvoting distance: 23.4 in (595 mm) | Gradeability, laden/unladen: 30/21 %
  • 58.3 in (1480 mm)
  • mast lowered: 77.6 in (1970 mm) | mast extended: 159.3 in (4046 mm) | of overhead guard: 85.2 in (2165 mm) | Seat height relating to SIP: 41.7 in (1060 mm) | Coupling: 11.8 in (300 mm)
  • 135.3 in (3437 mm)
  • to face of forks: 93.2 in (2367 mm)
  • (without backrest): 45.9 in (1165 mm)
  • Backrest: 43 in (1094 mm) | Fork-carriage: 40.9 in (1038 mm) | Aisle width for pallets 39.4" x 47.3" crossways: 142.4 in (3617 mm) | Aisle width for pallets 31.5" x 47.3" lengthways: 150.3 in (3817 mm)
  • Laden, below mast: 3 in (75 mm) | Centre of wheelbase: 5.1 in (130 mm)
  • 80.7 in (2050 mm)
  • 5000 lb (2250 kg)
  • loading, laden: 11640 lb (5280 kg) | loading, unladen: 3219 lb (1460 kg)
  • loading, laden: 1521 lb (690 kg) | loading, unladen: 4982 lb (2260 kg)
  • 11 gal (42 liter)
  • 8201 lb (3720 kg)
  • Operator type: Seated