2025 HANGCHA Big Pneumatic Forklift 11,000-15,500lbs FP60

Information

2025 HANGCHA Big Pneumatic Forklift 11,000-15,500lbs FP60

In developing the XF series, comfort and easy operation is always considered,for example, inproved vibrating levels, compound engine damper and full floationg seat and cabin are applied. Comfortable also contribute to increased productivity. The extra foot space is provided to reduce operator fatigue significantly. The new wide-open, non-slip step makes getting in and out easy and safe.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2025
  • HANGCHA
  • Big Pneumatic Forklift 11,000-15,500lbs FP60
  • 60 A
  • OKAMURA Powershift
  • LPG
  • Available
  • Fork-carriage: 67 in | Aisle width for pallets 39.4"x47.3" crossways: 200 in | Aisle width for pallets 31.5"x47.3" lengthways: 208 in | Min. right angle stacking aisle width(Ast): 3490 mm
  • mast lowered: 98.4 in | mast extended: 173.5 in | of overhead guard: 95.7 in | Seat height: 53 in | Coupling: 17 in

Specifications

  • 2025
  • HANGCHA
  • Big Pneumatic Forklift 11,000-15,500lbs
  • FP60
  • Pneumatic
  • CPYD60-XW24 | PSI 4.3L(certified)
  • EPA Tier2
  • 103 HP
  • LPG
  • 2300 r/min
  • 6
  • 263 in3
  • OKAMURA Powershift
  • FWD/RVS 4x/2
  • Pneumatic 2
  • 8.25-15-14PR
  • 8.25-15-14PR
  • Hydraulic
  • Mechanical
  • 60 A
  • 12 V
  • 12/105 V/Ah
  • Travel speed, laden/unladen: 17.5/19.2 mph | Lift speed, laden/unladen: 85/91 ft/min | Lowering speed, laden/unladen: 95/83 ft/min
  • Drawbar pull, laden/unladen: 14380/6310 N
  • 195 bar
  • Sound pressure level at the driver´s seat: 85 dB (A)
  • Load centre distance: 24 in | Load distance, centre of drive axle to fork: 23.5 in | Rear overhang: 595 mm | Tread, front: 58.6 in | Tread, rear: 66.9 in | Tilt of mast/fork carriage forward/backward: 6/12° | Free lift: 6.3 in | Lift: 118 in | Fork dimensions: 2.4x5.9x48 in | Distance between fork-arms: 310~1200 mm | Gradeability, laden/unladen: 50/20%
  • 90.5 in
  • mast lowered: 98.4 in | mast extended: 173.5 in | of overhead guard: 95.7 in | Seat height: 53 in | Coupling: 17 in
  • 186 in
  • to face of forks: 139 in
  • 80.7 in
  • Fork-carriage: 67 in | Aisle width for pallets 39.4"x47.3" crossways: 200 in | Aisle width for pallets 31.5"x47.3" lengthways: 208 in | Min. right angle stacking aisle width(Ast): 3490 mm
  • laden, mast: 7.5 in | centre of wheelbase: 10.6 in
  • 129 in | Internal: 48 in
  • 13500 lb
  • Loading, laden: 28190 lb | Loading, unladen: 8260 lb
  • Loading, laden: 3830 lb | Loading, unladen: 10530 lb
  • 90 gal
  • 90 gal
  • Oil for attachments: 120 l/min
  • Service: 18800 lb | Counter: 2780 kg
  • Operator type: Seated | Fork carriage DIN 15173, class/type A, B: IV A | Towing coupling,type DIN 15170: Pin