2025 HANGCHA IC Cushion Tire 13,500-15,500lbs FP60C
- Year 2025
- Make HANGCHA
- Model IC Cushion Tire 13,500-15,500lbs
2025 HANGCHA IC Cushion Tire 13,500-15,500lbs FP60C
2025 HANGCHA IC Cushion Tire 13,500-15,500lbs FP60C
XF Series LPG Cushion Tire Forklift is developed on basis of existing XF series by Hangcha, with world-leading technologies, a world-class forklift that can meet your demand in all dimensions thanks to the overall upgrading in appearance modeling, energy conservation and environmental protection, comfort, safety, and reliability. Application of new technologies including load-sensing hydraulic system, energy-efficient lighting system, low-emission engine, effective noise and vibration control, and brand-new control system offers higher efficiency and lower cost for your work.
Engine
Engine Manufacturer
CPYD60-XW24B-C | PSI 4.3L LPG CERT
Engine Power
105 hp (77 kW)
Fuel Type
LPG
Rated Engine Speed
2300 r/min
Cylinder Liners
6
Displacement
4294 cm3
Engine Torque
332.85/1400 N·m/r/min
Drivetrain
Transmission
OKAMURA Powershift
Stages
FWD/RVS: 1/1
Wheels & Tires
Wheels
Cushion 2×/2
Tires, Front Specification
28×12×22
Tires, Rear Specification
22×10×16
Brakes
Brake System Type
Hydraulic
Parking Brake
Mechnical
Electric
Generator
70 A
Electrical
Vehicle electrical system voltage: 12 V
Battery
Battery
12/60 V/Ah
Operational
Operating Speed
Travel speed, laden/unladen: 13/13.7 mph (21/22 km/h) | Lift speed, laden/unladen: 94.5/100.4 ft/min (0.48/0.51 m/s) | Lowering speed, laden/unladen: 98.4/74.8 ft/min (0.500/0.380 m/s)
Operating Conditions
Drawbar pull, laden/unladen: 44000/ N
Maximum Pressure
2683 psi(18.5 MPa) | for attachments: 3132 psi (21.6 MPa)
Dimensions
Dimensions
Load centre distance: 24 in (600 mm) | Load distance, centre of drive axle to fork: 19.6 in (498 mm) | Tread, front: 44.6 in (1133 mm) | Tread, rear: 46.6 in (1184 mm) | Tilt of mast/fork carriage forward/backward: 6/10° | Fork dimensions: 2.4×6×48 in (60×150×1220 mm) | Distance between fork-arms: 12.3-47.2 in (312-1198 mm) | Minimum plvoting distance: 24.3 in (617 mm) | Gradeability, laden/unladen 1mph(1.5km/h): 26/ %
Wheelbase
72 in (1830 mm)
Height
mast lowered: 98.4 in (2500 mm) | Free lift: 6.7 in (170 mm) | Lift: 118.1 in (3000 mm) | mast extended: 171.5 in (4357 mm) | of overhead guard: 88 in (2235 mm) | Seat: 50.4 in (1280 mm) | Coupling: 16.1 in (410 mm)
Overall Length
163.4 in (4150 mm)
Length
to face of forks: 115.4 in (2930 mm)
Overall Width
56.6 in (1438 mm)
Width
Backrest: 51.5 in (1308 mm) | Fork-carriage: 49.2 in (1250 mm) | Aisle width for pallets 1000 x 1200 crossways: 168.4 in (4278 mm) | Aisle width for pallets 800 x 1200 lengthways: 176.3 in (4478 mm)
Ground Clearance
laden, below mast: 4.3 in (110 mm) | centre of wheelbase: 7.5 in (190 mm)
Turning Radius
101.6 in (2580 mm) | Internal: 27.6 in (702 mm)
Capacities
Load Capacity, Land
13500 lb (6000 kg)
Axle Capacity, Front
Loading, laden: 28880 lb (13100 kg) | Loading, unladen: 6570 lb (2980 kg)
Axle Capacity, Rear
Loading, laden: 3860 lb (1750 kg) | Loading, unladen: 12940 lb (5870 kg)
Hydraulic Capacity
26.4 gal (100 liter)
Weights
Weight
Service: 19510 lb (8850 kg)
Features
Features
Operator type: Seated