Current HANGCHA Internal-Combustion-Cushion-Tire Cushion Tire IC Forklift 3,000-6,500lbs

2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP32C

2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP32C

Swipe to View More

  • Year 2021
  • Make HANGCHA
  • Model Cushion Tire IC Forklift 3,000-6,500lbs
Shop HANGCHA Pre-Owned
Product Details Specifications Photos
2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP32C

2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP32C

  • Year 2021
  • Manufacturer HANGCHA
  • Model Name Cushion Tire IC Forklift 3,000-6,500lbs
  • Trim Name FP32C
  • Generic Type (Primary) Cushion Tire
  • Engine Manufacturer CPYD32-XW71F-C / GCT GK25 LPG CERT
  • Engine Power 61.4 hp (45.8 kW)
  • Fuel Type LPG
  • Rated Engine Speed 2700 r/min
  • Cylinder Liners 4
  • Displacement 2488 cm3
  • Engine Torque 187/1600 N·m/r/min

2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP32C

XF series LPG cushion tire forklift is developed on basis of existing XF series by Hangcha, with world-leading technologies, a world-class forklift that can meet your demand in all dimensions thanks to the overall upgrading in appearance modeling, energy conservation and environmental protection, comfort, safety, and reliability. Application of new technologies including load-sensing hydraulic system, energy-eficient lighting system, low-emission engine, effective noise and vibration control, and brand-new control system offers higher eficiency and lower cost for your work.

Engine

Engine Manufacturer CPYD32-XW71F-C / GCT GK25 LPG CERT
Engine Power 61.4 hp (45.8 kW)
Fuel Type LPG
Rated Engine Speed 2700 r/min
Cylinder Liners 4
Displacement 2488 cm3
Engine Torque 187/1600 N·m/r/min

Drivetrain

Transmission Hangcha Powershift
Stages FWD/RVS: 1/1

Wheels & Tires

Wheels Cushion 2×/2
Tires, Front Specification 21×8×15
Tires, Rear Specification 16×6×10.5

Brakes

Brake System Type Service: Hydraulic
Parking Brake Mechnical

Electric

Generator 12 V | Vehicle electrical system voltage: 12 V

Battery

Battery voltage/nominal capacity: 12 V/60Ah

Operational

Operating Speed Travel, Laden/unladen: 10.9/11.5 mph (17.5/18.5 km/h) | Lift, laden/unladen: 98.4/104.3 ft/min (0.50/0.53 m/s) | Lowering, laden/unladen: 88.6/98.4 ft/min (0.45/0.50 m/s)
Operating Conditions Drawbar pull, laden/unladen: 23000/9000 N
Maximum Pressure 2538 psi (17.5 MPa)

Dimensions

Dimensions Load centre distance: 24 in (600 mm) | Load distance, centre of drive axle to fork: 17.7 in (450 mm) | Tread, front: 36.2 in (920 mm) | Tread, rear: 36.2 in (920 mm) | Tilt of mast/fork carriage forward/backward: 6/8 ° | Free Lift: 5.3 in (135 mm) | Lift: 118.1 in (3000 mm) | Fork dimensions: 1.8×4.8×42 in (45×122×1070 mm) | Distance between fork-arms: 9.9-42.6 in (252-1082 mm) | Minimum plvoting distance: 21.2 in (539 mm) | Gradeability, laden/unladen: 30/20 %
Wheelbase 57.1 in (1450 mm)
Height mast lowered: 77.6 in (1970 mm) | mast extended: 163.2 in (4145 mm) | of overhead guard: 83.3 in (2115 mm) | Seat height relating to SIP: 40.2 in (1020 mm) | Cupling: 10.2 in (260 mm)
Overall Length 138 in (3505 mm)
Length to face of forks: 96.7 in (2460 mm)
Overall Width (without backrest): 139 in (3530 mm)
Width Backrest: 45.5 in (1156 mm) | Fork-carriage: 43.3 in (1100 mm) | Aisle width for pallets 1000 x 1200 crossways: 146.1 in (3710 mm) | Aisle width for pallets 800 x 1200 lengthways: 153.9 in(3910 mm)
Ground Clearance Laden, below mast: 3.5 in (90 mm) | centre of wheelbase: 5.1 in (130 mm)
Turning Radius 81.1 in(2060 mm)

Capacities

Load Capacity, Land 6500 lb (2950 kg)
Axle Capacity, Front Loading, laden: 14220 lb (6450 kg) | Loading, unladen: 3200 lb (1450 kg)
Axle Capacity, Rear Loading, laden: 2180 lb (990 kg) | Loading, unladen: 6700 lb (3040 kg)
Hydraulic Capacity 11 gal (42 liter)

Weights

Weight 9900 lb (4490 kg)

Features

Features Operator type: Seated

Product Photography