2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP25C

Information

2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP25C

XF series LPG cushion tire forklift is developed on basis of existing XF series by Hangcha, with world-leading technologies, a world-class forklift that can meet your demand in all dimensions thanks to the overall upgrading in appearance modeling, energy conservation and environmental protection, comfort, safety, and reliability. Application of new technologies including load-sensing hydraulic system, energy-eficient lighting system, low-emission engine, effective noise and vibration control, and brand-new control system offers higher eficiency and lower cost for your work.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2021
  • HANGCHA
  • Cushion Tire IC Forklift 3,000-6,500lbs FP25C
  • 12 V | Vehicle electrical system voltage: 12 V
  • Hangcha Powershift
  • LPG
  • Available
  • Backrest: 43 in (1094 mm) | Fork-carriage: 40.9 in (1038 mm) | Aisle width for pallets 1000 x 1200 crossways: 142.4 in(3617 mm) | Aisle width for pallets 800 x 1200 lengthways: 150.3 in (3817 mm)
  • mast lowered: 77.6 in (1970 mm) | mast extended: 159.3 in (4046 mm) | of overhead guard: 83.3 in (2115 mm) | Seat height relating to SIP: 40.2 in (1020 mm) | Cupling: 10.2 in (260 mm)

Specifications

  • 2021
  • HANGCHA
  • Cushion Tire IC Forklift 3,000-6,500lbs
  • FP25C
  • Cushion Tire
  • CPYD25-XW71F-C / GCT GK25 LPG CERT
  • 61.4 hp (45.8 kW)
  • LPG
  • 2700 r/min
  • 4
  • 2488 cm3
  • 187/1600 N·m/r/min
  • Hangcha Powershift
  • FWD/RVS: 1/1
  • Cushion 2×/2
  • 21×7×15
  • 16×6×10.5
  • Service: Hydraulic
  • Mechnical
  • 12 V | Vehicle electrical system voltage: 12 V
  • voltage/nominal capacity: 12 V/60Ah
  • Travel, Laden/unladen: 10.9/11.5 mph (17.5/18.5 km/h) | Lift, laden/unladen: 122/128 ft/min (0.62/0.65 m/s) | Lowering, laden/unladen: 88.6/98.4 ft/min (0.45/0.50 m/s)
  • Drawbar pull, laden/unladen: 23000/9000 N
  • 2538 psi (17.5 MPa)
  • Load centre distance: 24 in (600 mm) | Load distance, centre of drive axle to fork: 16.8 in (427 mm) | Tread, front: 35.4 in (900 mm) | Tread, rear: 36.2 in (920 mm) | Tilt of mast/fork carriage forward/backward: 6/8 ° | Free Lift: 5.5 in (140 mm) | Lift: 118.1 in (3000 mm) | Fork dimensions: 1.6×4.8×42 in (40×122×1070 mm) | Distance between fork-arms: 8.9-39.7 in (226-1008 mm) | Minimum plvoting distance: 21.2 in (539 mm) | Gradeability, laden/unladen: 30/20 %
  • 57.1 in (1450 mm)
  • mast lowered: 77.6 in (1970 mm) | mast extended: 159.3 in (4046 mm) | of overhead guard: 83.3 in (2115 mm) | Seat height relating to SIP: 40.2 in (1020 mm) | Cupling: 10.2 in (260 mm)
  • 135.1 in (3432 mm)
  • to face of forks: 93 in (2362 mm)
  • (without backrest): 42.5 in (1080 mm)
  • Backrest: 43 in (1094 mm) | Fork-carriage: 40.9 in (1038 mm) | Aisle width for pallets 1000 x 1200 crossways: 142.4 in(3617 mm) | Aisle width for pallets 800 x 1200 lengthways: 150.3 in (3817 mm)
  • Laden, below mast: 3.5 in (90 mm) | centre of wheelbase: 5.1 in (130 mm)
  • 78.3 in (1990 mm)
  • 5000 lb (2250 kg)
  • Loading, laden: 11830 lb (5350 kg) | Loading, unladen: 3215 lb (1460 kg)
  • Loading, laden: 1810 lb (820 kg) | Loading, unladen: 5425 lb (2460 kg)
  • 11 gal (42 liter)
  • 8640 lb (3920 kg)
  • Operator type: Seated