Current HANGCHA Internal-Combustion-Cushion-Tire Cushion Tire IC Forklift 3,000-6,500lbs

2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP25C

2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP25C

Swipe to View More

  • Year 2021
  • Make HANGCHA
  • Model Cushion Tire IC Forklift 3,000-6,500lbs
Shop HANGCHA Pre-Owned
Product Details Specifications Photos
2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP25C

2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP25C

  • Year 2021
  • Manufacturer HANGCHA
  • Model Name Cushion Tire IC Forklift 3,000-6,500lbs
  • Trim Name FP25C
  • Generic Type (Primary) Cushion Tire
  • Engine Manufacturer CPYD25-XW71F-C / GCT GK25 LPG CERT
  • Engine Power 61.4 hp (45.8 kW)
  • Fuel Type LPG
  • Rated Engine Speed 2700 r/min
  • Cylinder Liners 4
  • Displacement 2488 cm3
  • Engine Torque 187/1600 N·m/r/min

2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP25C

XF series LPG cushion tire forklift is developed on basis of existing XF series by Hangcha, with world-leading technologies, a world-class forklift that can meet your demand in all dimensions thanks to the overall upgrading in appearance modeling, energy conservation and environmental protection, comfort, safety, and reliability. Application of new technologies including load-sensing hydraulic system, energy-eficient lighting system, low-emission engine, effective noise and vibration control, and brand-new control system offers higher eficiency and lower cost for your work.

Engine

Engine Manufacturer CPYD25-XW71F-C / GCT GK25 LPG CERT
Engine Power 61.4 hp (45.8 kW)
Fuel Type LPG
Rated Engine Speed 2700 r/min
Cylinder Liners 4
Displacement 2488 cm3
Engine Torque 187/1600 N·m/r/min

Drivetrain

Transmission Hangcha Powershift
Stages FWD/RVS: 1/1

Wheels & Tires

Wheels Cushion 2×/2
Tires, Front Specification 21×7×15
Tires, Rear Specification 16×6×10.5

Brakes

Brake System Type Service: Hydraulic
Parking Brake Mechnical

Electric

Generator 12 V | Vehicle electrical system voltage: 12 V

Battery

Battery voltage/nominal capacity: 12 V/60Ah

Operational

Operating Speed Travel, Laden/unladen: 10.9/11.5 mph (17.5/18.5 km/h) | Lift, laden/unladen: 122/128 ft/min (0.62/0.65 m/s) | Lowering, laden/unladen: 88.6/98.4 ft/min (0.45/0.50 m/s)
Operating Conditions Drawbar pull, laden/unladen: 23000/9000 N
Maximum Pressure 2538 psi (17.5 MPa)

Dimensions

Dimensions Load centre distance: 24 in (600 mm) | Load distance, centre of drive axle to fork: 16.8 in (427 mm) | Tread, front: 35.4 in (900 mm) | Tread, rear: 36.2 in (920 mm) | Tilt of mast/fork carriage forward/backward: 6/8 ° | Free Lift: 5.5 in (140 mm) | Lift: 118.1 in (3000 mm) | Fork dimensions: 1.6×4.8×42 in (40×122×1070 mm) | Distance between fork-arms: 8.9-39.7 in (226-1008 mm) | Minimum plvoting distance: 21.2 in (539 mm) | Gradeability, laden/unladen: 30/20 %
Wheelbase 57.1 in (1450 mm)
Height mast lowered: 77.6 in (1970 mm) | mast extended: 159.3 in (4046 mm) | of overhead guard: 83.3 in (2115 mm) | Seat height relating to SIP: 40.2 in (1020 mm) | Cupling: 10.2 in (260 mm)
Overall Length 135.1 in (3432 mm)
Length to face of forks: 93 in (2362 mm)
Overall Width (without backrest): 42.5 in (1080 mm)
Width Backrest: 43 in (1094 mm) | Fork-carriage: 40.9 in (1038 mm) | Aisle width for pallets 1000 x 1200 crossways: 142.4 in(3617 mm) | Aisle width for pallets 800 x 1200 lengthways: 150.3 in (3817 mm)
Ground Clearance Laden, below mast: 3.5 in (90 mm) | centre of wheelbase: 5.1 in (130 mm)
Turning Radius 78.3 in (1990 mm)

Capacities

Load Capacity, Land 5000 lb (2250 kg)
Axle Capacity, Front Loading, laden: 11830 lb (5350 kg) | Loading, unladen: 3215 lb (1460 kg)
Axle Capacity, Rear Loading, laden: 1810 lb (820 kg) | Loading, unladen: 5425 lb (2460 kg)
Hydraulic Capacity 11 gal (42 liter)

Weights

Weight 8640 lb (3920 kg)

Features

Features Operator type: Seated

Product Photography