2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP18C

Information

2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP18C

XF series LPG cushion tire forklift is developed on basis of existing XF series by Hangcha, with world-leading technologies, a world-class forklift that can meet your demand in all dimensions thanks to the overall upgrading in appearance modeling, energy conservation and environmental protection, comfort, safety, and reliability. Application of new technologies including load-sensing hydraulic system, energy-eficient lighting system, low-emission engine, effective noise and vibration control, and brand-new control system offers higher eficiency and lower cost for your work.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2021
  • HANGCHA
  • Cushion Tire IC Forklift 3,000-6,500lbs FP18C
  • 12 V | Vehicle electrical system voltage: 12 V
  • Hangcha Powershift
  • LPG
  • Available
  • Backrest: 35.4 in (900 mm) | Fork-carriage: 37.6 in (954 mm) | Aisle width for pallets 1000 x 1200 crossways: 133.9 in (3401 mm) | Aisle width for pallets 800 x 1200 lengthways: 141.8 in (3601 mm)
  • mast lowered: 77.3 in (1963.5 mm) | mast extended: 155.7 in (3955 mm) | of overhead guard: 81.7 in (2075 mm) | Seat height relating to SIP: 38.6 in (980 mm) | Cupling: 10.2 in (260 mm)

Specifications

  • 2021
  • HANGCHA
  • Cushion Tire IC Forklift 3,000-6,500lbs
  • FP18C
  • Cushion Tire
  • CPYD18-XW81F-C / GCT GK21 LPG CERT
  • 53.6 hp (40 kW)
  • LPG
  • 2700 r/min
  • 4
  • 2065 cm3
  • 150/2000 N·m/r/min
  • Hangcha Powershift
  • FWD/RVS: 1/1
  • Cushion 2×/2
  • 18×6×12-1/8
  • 14×5×10
  • Service: Hydraulic
  • Mechnical
  • 12 V | Vehicle electrical system voltage: 12 V
  • voltage/nominal capacity: 12 V/60Ah
  • Travel, Laden/unladen: 11.2/11.5 mph (18/18.5 km/h) | Lift, laden/unladen: 110/118 ft/min (0.56/0.60 m/s) | Lowering, laden/unladen: 88.6/98.4 ft/min (0.45/0.50 m/s)
  • Drawbar pull, laden/unladen: 16500/8500 N
  • 2538 psi (17.5 MPa)
  • Load centre distance: 24 in (600 mm) | Load distance, centre of drive axle to fork: 15.4 in (391 mm) | Tread, front: 31.9 in (810 mm) | Tread, rear: 32.7 in (830 mm) | Tilt of mast/fork carriage forward/backward: 6/8 ° | Free Lift: 5.3 in (135 mm) | Lift: 118.1 in (3000 mm) | Fork dimensions: 1.4×3.9×36.2 in (35×100×920 mm) | Distance between fork-arms: 8.9-36.2 in (226-920 mm) | Minimum plvoting distance: 18.9 in (481 mm) | Gradeability, laden/unladen: 25/20 %
  • 49.2 in (1250 mm)
  • mast lowered: 77.3 in (1963.5 mm) | mast extended: 155.7 in (3955 mm) | of overhead guard: 81.7 in (2075 mm) | Seat height relating to SIP: 38.6 in (980 mm) | Cupling: 10.2 in (260 mm)
  • 120 in (3046 mm)
  • to face of forks: 83.7 in (2126 mm)
  • (without backrest): 38 in (964 mm)
  • Backrest: 35.4 in (900 mm) | Fork-carriage: 37.6 in (954 mm) | Aisle width for pallets 1000 x 1200 crossways: 133.9 in (3401 mm) | Aisle width for pallets 800 x 1200 lengthways: 141.8 in (3601 mm)
  • Laden, below mast: 3.3in (83.5 mm) | centre of wheelbase: 3.7 in (93.5 mm)
  • 71.3 in (1810 mm)
  • 3500 lb (1600 kg)
  • Loading, laden: 9000 lb(4095 kg) | Loading, unladen: 2600 lb (1180 kg)
  • Loading, laden: 1330 lb (605 kg) | Loading, unladen: 4230 lb (1920 kg)
  • 8.5 gal (32 liter)
  • 6830 lb (3100 kg)
  • Operator type: Seated