Current HANGCHA Internal-Combustion-Cushion-Tire Cushion Tire IC Forklift 3,000-6,500lbs

2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP18C

2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP18C

Swipe to View More

  • Year 2021
  • Make HANGCHA
  • Model Cushion Tire IC Forklift 3,000-6,500lbs
Shop HANGCHA Pre-Owned
Product Details Specifications Photos
2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP18C

2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP18C

  • Year 2021
  • Manufacturer HANGCHA
  • Model Name Cushion Tire IC Forklift 3,000-6,500lbs
  • Trim Name FP18C
  • Generic Type (Primary) Cushion Tire
  • Engine Manufacturer CPYD18-XW81F-C / GCT GK21 LPG CERT
  • Engine Power 53.6 hp (40 kW)
  • Fuel Type LPG
  • Rated Engine Speed 2700 r/min
  • Cylinder Liners 4
  • Displacement 2065 cm3
  • Engine Torque 150/2000 N·m/r/min

2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP18C

XF series LPG cushion tire forklift is developed on basis of existing XF series by Hangcha, with world-leading technologies, a world-class forklift that can meet your demand in all dimensions thanks to the overall upgrading in appearance modeling, energy conservation and environmental protection, comfort, safety, and reliability. Application of new technologies including load-sensing hydraulic system, energy-eficient lighting system, low-emission engine, effective noise and vibration control, and brand-new control system offers higher eficiency and lower cost for your work.

Engine

Engine Manufacturer CPYD18-XW81F-C / GCT GK21 LPG CERT
Engine Power 53.6 hp (40 kW)
Fuel Type LPG
Rated Engine Speed 2700 r/min
Cylinder Liners 4
Displacement 2065 cm3
Engine Torque 150/2000 N·m/r/min

Drivetrain

Transmission Hangcha Powershift
Stages FWD/RVS: 1/1

Wheels & Tires

Wheels Cushion 2×/2
Tires, Front Specification 18×6×12-1/8
Tires, Rear Specification 14×5×10

Brakes

Brake System Type Service: Hydraulic
Parking Brake Mechnical

Electric

Generator 12 V | Vehicle electrical system voltage: 12 V

Battery

Battery voltage/nominal capacity: 12 V/60Ah

Operational

Operating Speed Travel, Laden/unladen: 11.2/11.5 mph (18/18.5 km/h) | Lift, laden/unladen: 110/118 ft/min (0.56/0.60 m/s) | Lowering, laden/unladen: 88.6/98.4 ft/min (0.45/0.50 m/s)
Operating Conditions Drawbar pull, laden/unladen: 16500/8500 N
Maximum Pressure 2538 psi (17.5 MPa)

Dimensions

Dimensions Load centre distance: 24 in (600 mm) | Load distance, centre of drive axle to fork: 15.4 in (391 mm) | Tread, front: 31.9 in (810 mm) | Tread, rear: 32.7 in (830 mm) | Tilt of mast/fork carriage forward/backward: 6/8 ° | Free Lift: 5.3 in (135 mm) | Lift: 118.1 in (3000 mm) | Fork dimensions: 1.4×3.9×36.2 in (35×100×920 mm) | Distance between fork-arms: 8.9-36.2 in (226-920 mm) | Minimum plvoting distance: 18.9 in (481 mm) | Gradeability, laden/unladen: 25/20 %
Wheelbase 49.2 in (1250 mm)
Height mast lowered: 77.3 in (1963.5 mm) | mast extended: 155.7 in (3955 mm) | of overhead guard: 81.7 in (2075 mm) | Seat height relating to SIP: 38.6 in (980 mm) | Cupling: 10.2 in (260 mm)
Overall Length 120 in (3046 mm)
Length to face of forks: 83.7 in (2126 mm)
Overall Width (without backrest): 38 in (964 mm)
Width Backrest: 35.4 in (900 mm) | Fork-carriage: 37.6 in (954 mm) | Aisle width for pallets 1000 x 1200 crossways: 133.9 in (3401 mm) | Aisle width for pallets 800 x 1200 lengthways: 141.8 in (3601 mm)
Ground Clearance Laden, below mast: 3.3in (83.5 mm) | centre of wheelbase: 3.7 in (93.5 mm)
Turning Radius 71.3 in (1810 mm)

Capacities

Load Capacity, Land 3500 lb (1600 kg)
Axle Capacity, Front Loading, laden: 9000 lb(4095 kg) | Loading, unladen: 2600 lb (1180 kg)
Axle Capacity, Rear Loading, laden: 1330 lb (605 kg) | Loading, unladen: 4230 lb (1920 kg)
Hydraulic Capacity 8.5 gal (32 liter)

Weights

Weight 6830 lb (3100 kg)

Features

Features Operator type: Seated

Product Photography