2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP15C

Information

2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP15C

XF series LPG cushion tire forklift is developed on basis of existing XF series by Hangcha, with world-leading technologies, a world-class forklift that can meet your demand in all dimensions thanks to the overall upgrading in appearance modeling, energy conservation and environmental protection, comfort, safety, and reliability. Application of new technologies including load-sensing hydraulic system, energy-eficient lighting system, low-emission engine, effective noise and vibration control, and brand-new control system offers higher eficiency and lower cost for your work.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2021
  • HANGCHA
  • Cushion Tire IC Forklift 3,000-6,500lbs FP15C
  • 12 V | Vehicle electrical system voltage: 12 V
  • Hangcha Powershift
  • LPG
  • Available
  • Backrest: 35.4 in (900 mm) | Fork-carriage: 37.6 in (954 mm) | Aisle width for pallets 1000 x 1200 crossways: 132.7 in (3371 mm) | Aisle width for pallets 800 x 1200 lengthways: 140.6 in (3571 mm)
  • mast lowered: 77.3 in (1963.5 mm) | mast extended: 155.7 in (3955 mm) | of overhead guard: 81.7 in (2075 mm) | Seat height relating to SIP: 38.6 in (980 mm) | Cupling: 10.2 in (260 mm)

Specifications

  • 2021
  • HANGCHA
  • Cushion Tire IC Forklift 3,000-6,500lbs
  • FP15C
  • Cushion Tire
  • CPYD15-XW81F-C / GCT GK21 LPG CERT
  • 53.6 hp (40 kW)
  • LPG
  • 2700 r/min
  • 4
  • 2065 cm3
  • 150/2000 N·m/r/min
  • Hangcha Powershift
  • FWD/RVS: 1/1
  • Cushion 2×/2
  • 18×6×12-1/8
  • 14×5×10
  • Service: Hydraulic
  • Mechnical
  • 12 V | Vehicle electrical system voltage: 12 V
  • voltage/nominal capacity: 12 V/60Ah
  • Travel, Laden/unladen: 11.2/11.5 mph (18/18.5 km/h) | Lift, laden/unladen: 110/118 ft/min (0.56/0.60 m/s) | Lowering, laden/unladen: 88.6/98.4 ft/min (0.45/0.50 m/s)
  • Drawbar pull, laden/unladen: 16500/8500 N
  • 2103 psi (14.5 MPa)
  • Load centre distance: 24 in (600 mm) | Load distance, centre of drive axle to fork: 15.4 in (391 mm) | Tread, front: 31.9 in (810 mm) | Tread, rear: 32.7 in (830 mm) | Tilt of mast/fork carriage forward/backward: 6/8 ° | Free Lift: 5.3 in (135 mm) | Lift: 118.1 in (3000 mm) | Fork dimensions: 1.4×3.9×36.2 in (35×100×920 mm) | Distance between fork-arms: 8.9-36.2 in (226-920 mm) | Minimum plvoting distance: 18.9 in (481 mm) | Gradeability, laden/unladen: 25/20 %
  • 49.2 in (1250 mm)
  • mast lowered: 77.3 in (1963.5 mm) | mast extended: 155.7 in (3955 mm) | of overhead guard: 81.7 in (2075 mm) | Seat height relating to SIP: 38.6 in (980 mm) | Cupling: 10.2 in (260 mm)
  • 118.7 in (3016 mm)
  • to face of forks: 82.5 in (2096 mm)
  • (without backrest): 38 in (964 mm)
  • Backrest: 35.4 in (900 mm) | Fork-carriage: 37.6 in (954 mm) | Aisle width for pallets 1000 x 1200 crossways: 132.7 in (3371 mm) | Aisle width for pallets 800 x 1200 lengthways: 140.6 in (3571 mm)
  • Laden, below mast: 3.3in (83.5 mm) | centre of wheelbase: 3.7 in (93.5 mm)
  • 70.1 in (1780 mm)
  • 3000 lb (1350 kg)
  • Loading, laden: 8115 lb (3670 kg) | Loading, unladen: 2670 lb (1210 kg)
  • Loading, laden: 1365 lb (620 kg) | Loading, unladen: 3810 lb (1730 kg)
  • 8.5 gal (32 liter)
  • 6480 lb (2940 kg)
  • Operator type: Seated