Current HANGCHA Internal-Combustion-Cushion-Tire Cushion Tire IC Forklift 3,000-6,500lbs

2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP15C

2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP15C

Swipe to View More

  • Year 2021
  • Make HANGCHA
  • Model Cushion Tire IC Forklift 3,000-6,500lbs
Shop HANGCHA Pre-Owned
Product Details Specifications Photos
2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP15C

2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP15C

  • Year 2021
  • Manufacturer HANGCHA
  • Model Name Cushion Tire IC Forklift 3,000-6,500lbs
  • Trim Name FP15C
  • Generic Type (Primary) Cushion Tire
  • Engine Manufacturer CPYD15-XW81F-C / GCT GK21 LPG CERT
  • Engine Power 53.6 hp (40 kW)
  • Fuel Type LPG
  • Rated Engine Speed 2700 r/min
  • Cylinder Liners 4
  • Displacement 2065 cm3
  • Engine Torque 150/2000 N·m/r/min

2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP15C

XF series LPG cushion tire forklift is developed on basis of existing XF series by Hangcha, with world-leading technologies, a world-class forklift that can meet your demand in all dimensions thanks to the overall upgrading in appearance modeling, energy conservation and environmental protection, comfort, safety, and reliability. Application of new technologies including load-sensing hydraulic system, energy-eficient lighting system, low-emission engine, effective noise and vibration control, and brand-new control system offers higher eficiency and lower cost for your work.

Engine

Engine Manufacturer CPYD15-XW81F-C / GCT GK21 LPG CERT
Engine Power 53.6 hp (40 kW)
Fuel Type LPG
Rated Engine Speed 2700 r/min
Cylinder Liners 4
Displacement 2065 cm3
Engine Torque 150/2000 N·m/r/min

Drivetrain

Transmission Hangcha Powershift
Stages FWD/RVS: 1/1

Wheels & Tires

Wheels Cushion 2×/2
Tires, Front Specification 18×6×12-1/8
Tires, Rear Specification 14×5×10

Brakes

Brake System Type Service: Hydraulic
Parking Brake Mechnical

Electric

Generator 12 V | Vehicle electrical system voltage: 12 V

Battery

Battery voltage/nominal capacity: 12 V/60Ah

Operational

Operating Speed Travel, Laden/unladen: 11.2/11.5 mph (18/18.5 km/h) | Lift, laden/unladen: 110/118 ft/min (0.56/0.60 m/s) | Lowering, laden/unladen: 88.6/98.4 ft/min (0.45/0.50 m/s)
Operating Conditions Drawbar pull, laden/unladen: 16500/8500 N
Maximum Pressure 2103 psi (14.5 MPa)

Dimensions

Dimensions Load centre distance: 24 in (600 mm) | Load distance, centre of drive axle to fork: 15.4 in (391 mm) | Tread, front: 31.9 in (810 mm) | Tread, rear: 32.7 in (830 mm) | Tilt of mast/fork carriage forward/backward: 6/8 ° | Free Lift: 5.3 in (135 mm) | Lift: 118.1 in (3000 mm) | Fork dimensions: 1.4×3.9×36.2 in (35×100×920 mm) | Distance between fork-arms: 8.9-36.2 in (226-920 mm) | Minimum plvoting distance: 18.9 in (481 mm) | Gradeability, laden/unladen: 25/20 %
Wheelbase 49.2 in (1250 mm)
Height mast lowered: 77.3 in (1963.5 mm) | mast extended: 155.7 in (3955 mm) | of overhead guard: 81.7 in (2075 mm) | Seat height relating to SIP: 38.6 in (980 mm) | Cupling: 10.2 in (260 mm)
Overall Length 118.7 in (3016 mm)
Length to face of forks: 82.5 in (2096 mm)
Overall Width (without backrest): 38 in (964 mm)
Width Backrest: 35.4 in (900 mm) | Fork-carriage: 37.6 in (954 mm) | Aisle width for pallets 1000 x 1200 crossways: 132.7 in (3371 mm) | Aisle width for pallets 800 x 1200 lengthways: 140.6 in (3571 mm)
Ground Clearance Laden, below mast: 3.3in (83.5 mm) | centre of wheelbase: 3.7 in (93.5 mm)
Turning Radius 70.1 in (1780 mm)

Capacities

Load Capacity, Land 3000 lb (1350 kg)
Axle Capacity, Front Loading, laden: 8115 lb (3670 kg) | Loading, unladen: 2670 lb (1210 kg)
Axle Capacity, Rear Loading, laden: 1365 lb (620 kg) | Loading, unladen: 3810 lb (1730 kg)
Hydraulic Capacity 8.5 gal (32 liter)

Weights

Weight 6480 lb (2940 kg)

Features

Features Operator type: Seated

Product Photography