2025 HANGCHA Box Car Special Forklift 8,000-12,000lbs FP55CB

Information

2025 HANGCHA Box Car Special Forklift 8,000-12,000lbs FP55CB

XF Series Box Car Special Forklift is developed on basis of existing XF series by Hangcha, with world-leading technologies, a world-class forklift that can meet your demand in all dimensions thanks to the overall upgrading in appearance modeling, energy conservation and environmental protection, comfort, safety, and reliability. Application of new technologies including load-sensing hydraulic system, energy-efficient lighting system, low-emission engine, effective noise and vibration control, and brand-new control system offers higher eciency and lower cost for your work.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2025
  • HANGCHA
  • Box Car Special Forklift 8,000-12,000lbs FP55CB
  • 70 A
  • OKAMURA Powershift
  • LPG
  • Available
  • Backrest: 51.7 in (1314 mm) | Fork-carriage: 49.2 in (1250 mm) | Aisle width for pallets 1000 x 1200 crossways: 151.6 in (3850 mm) | Aisle width for pallets 800 x 1200 lengthways: 159.4 in (4050 mm)
  • mast lowered: 86.2 in (2190 mm) | Free lift: 4.7 in (120 mm) | Lift: 118.1 in (3000 mm) | mast extended: 166.3 in (4225 mm) | of overhead guard: 86.5 in (2198 mm) | Seat height relating to SIP: 51.1 in (1299 mm) | Coupling: 14.6 in (370 mm)

Specifications

  • 2025
  • HANGCHA
  • Box Car Special Forklift 8,000-12,000lbs
  • FP55CB
  • Pneumatic
  • CPYD55-XW24B-CB | PSI 4.3L LPG CERT
  • 105 hp(77 kW)
  • LPG
  • 2300 r/min
  • 6
  • 4294 cm3
  • 332.85/1400 N·m/r/min
  • OKAMURA Powershift
  • FWD/RVS: 1/1
  • Cushion 2×/2
  • 22×9-16
  • 18×6-12.125
  • Hydraulic
  • Mechnical
  • 70 A
  • Vehicle electrical system voltage: 12 V
  • 12/60 V/Ah
  • Travel speed, laden/unladen: 11.4/12.1 mph (18.3/19.4 km/h) | Lift speed, laden/unladen: 78.7/88.6 ft/min (0.40/0.45 m/s) | Lowering speed, laden/unladen: 98.4/88.6 ft/min(0.50/0.45 m/s)
  • Drawbar pull, laden/unladen: 48000/18400 N
  • 2683 psi(18.5 MPa)
  • Load centre distance: 24 in (600 mm) | Load distance, centre of drive axle to fork: 18.5 in (470 mm) | Tread, front: 43.9 in (1115.2 mm) | Tread, rear: 44.3 in (1125 mm) | Tilt of mast/fork carriage forward/backward: 5/6° | Fork dimensions: 2.4×6×48 in (60×150×1220 mm) | Distance between fork-arms: 12.2-46.9 in (310-1190 mm) | Minimum plvoting distance: 25.3 in (642 mm) | Gradeability, laden/unladen: 34/16 %
  • 70.5 kg (1790 mm)
  • mast lowered: 86.2 in (2190 mm) | Free lift: 4.7 in (120 mm) | Lift: 118.1 in (3000 mm) | mast extended: 166.3 in (4225 mm) | of overhead guard: 86.5 in (2198 mm) | Seat height relating to SIP: 51.1 in (1299 mm) | Coupling: 14.6 in (370 mm)
  • 154.3 in (3920 mm)
  • to face of forks: 106.3 in (2700 mm)
  • (without backrest): 55.9 in (1420 mm)
  • Backrest: 51.7 in (1314 mm) | Fork-carriage: 49.2 in (1250 mm) | Aisle width for pallets 1000 x 1200 crossways: 151.6 in (3850 mm) | Aisle width for pallets 800 x 1200 lengthways: 159.4 in (4050 mm)
  • laden, below mast: 3.1 in (80 mm) | centre of wheelbase: 5.9 in (149 mm)
  • 93.5 in (2380 mm)
  • 12000 lb (5500 kg)
  • Loading, laden: 25625 lb (11680 kg) | Loading, unladen: 6375 lb (2890 kg)
  • Loading, laden: 25625/3130(11680/1420) | Loading, unladen: 10380 lb (4710 kg)
  • 26.4 gal (100 liter)
  • 16755 lb (7600 kg)
  • Operator type: Seated