2025 HANGCHA Box Car Special Forklift 8,000-12,000lbs FP55CB
- Year 2025
- Make HANGCHA
- Model Box Car Special Forklift 8,000-12,000lbs
2025 HANGCHA Box Car Special Forklift 8,000-12,000lbs FP55CB
2025 HANGCHA Box Car Special Forklift 8,000-12,000lbs FP55CB
XF Series Box Car Special Forklift is developed on basis of existing XF series by Hangcha, with world-leading technologies, a world-class forklift that can meet your demand in all dimensions thanks to the overall upgrading in appearance modeling, energy conservation and environmental protection, comfort, safety, and reliability. Application of new technologies including load-sensing hydraulic system, energy-efficient lighting system, low-emission engine, effective noise and vibration control, and brand-new control system offers higher eciency and lower cost for your work.
Engine
Engine Manufacturer
CPYD55-XW24B-CB | PSI 4.3L LPG CERT
Engine Power
105 hp(77 kW)
Fuel Type
LPG
Rated Engine Speed
2300 r/min
Cylinder Liners
6
Displacement
4294 cm3
Engine Torque
332.85/1400 N·m/r/min
Drivetrain
Transmission
OKAMURA Powershift
Stages
FWD/RVS: 1/1
Wheels & Tires
Wheels
Cushion 2×/2
Tires, Front Specification
22×9-16
Tires, Rear Specification
18×6-12.125
Brakes
Brake System Type
Hydraulic
Parking Brake
Mechnical
Electric
Generator
70 A
Electrical
Vehicle electrical system voltage: 12 V
Battery
Battery
12/60 V/Ah
Operational
Operating Speed
Travel speed, laden/unladen: 11.4/12.1 mph (18.3/19.4 km/h) | Lift speed, laden/unladen: 78.7/88.6 ft/min (0.40/0.45 m/s) | Lowering speed, laden/unladen: 98.4/88.6 ft/min(0.50/0.45 m/s)
Operating Conditions
Drawbar pull, laden/unladen: 48000/18400 N
Maximum Pressure
2683 psi(18.5 MPa)
Dimensions
Dimensions
Load centre distance: 24 in (600 mm) | Load distance, centre of drive axle to fork: 18.5 in (470 mm) | Tread, front: 43.9 in (1115.2 mm) | Tread, rear: 44.3 in (1125 mm) | Tilt of mast/fork carriage forward/backward: 5/6° | Fork dimensions: 2.4×6×48 in (60×150×1220 mm) | Distance between fork-arms: 12.2-46.9 in (310-1190 mm) | Minimum plvoting distance: 25.3 in (642 mm) | Gradeability, laden/unladen: 34/16 %
Wheelbase
70.5 kg (1790 mm)
Height
mast lowered: 86.2 in (2190 mm) | Free lift: 4.7 in (120 mm) | Lift: 118.1 in (3000 mm) | mast extended: 166.3 in (4225 mm) | of overhead guard: 86.5 in (2198 mm) | Seat height relating to SIP: 51.1 in (1299 mm) | Coupling: 14.6 in (370 mm)
Overall Length
154.3 in (3920 mm)
Length
to face of forks: 106.3 in (2700 mm)
Overall Width
(without backrest): 55.9 in (1420 mm)
Width
Backrest: 51.7 in (1314 mm) | Fork-carriage: 49.2 in (1250 mm) | Aisle width for pallets 1000 x 1200 crossways: 151.6 in (3850 mm) | Aisle width for pallets 800 x 1200 lengthways: 159.4 in (4050 mm)
Ground Clearance
laden, below mast: 3.1 in (80 mm) | centre of wheelbase: 5.9 in (149 mm)
Turning Radius
93.5 in (2380 mm)
Capacities
Load Capacity, Land
12000 lb (5500 kg)
Axle Capacity, Front
Loading, laden: 25625 lb (11680 kg) | Loading, unladen: 6375 lb (2890 kg)
Axle Capacity, Rear
Loading, laden: 25625/3130(11680/1420) | Loading, unladen: 10380 lb (4710 kg)
Hydraulic Capacity
26.4 gal (100 liter)
Weights
Weight
16755 lb (7600 kg)
Features
Features
Operator type: Seated