2021 HANGCHA Box Car Special Forklift 8,000-12,000lbs FP55CB
- Year 2021
- Make HANGCHA
- Model Box Car Special Forklift 8,000-12,000lbs
2021 HANGCHA Box Car Special Forklift 8,000-12,000lbs FP55CB
2021 HANGCHA Box Car Special Forklift 8,000-12,000lbs FP55CB
XF Series Box Car Special Forklift is developed on basis of existing XF series by Hangcha, with world-leading technologies, a world-class forklift that can meet your demand in all dimensions thanks to the overall upgrading in appearance modeling, energy conservation and environmental protection, comfort, safety, and reliability. Application of new technologies including load-sensing hydraulic system, energy-efficient lighting system, low-emission engine, effective noise and vibration control, and brand-new control system offers higher efficiency and lower cost for your work.
Engine
Engine Manufacturer
CPYD35-XW24B-CB / PSI 4.3L LPG CERT
Engine Power
105 hp(77 kW)
Fuel Type
LPG
Rated Engine Speed
2300 r/min
Cylinder Liners
6
Displacement
4294 cm3
Engine Torque
332.85/1400 N·m/r/min
Drivetrain
Transmission
OKAMURA Powershift
Stages
FWD/RVS: 1/1
Wheels & Tires
Wheels
Cushion 2×/2
Tires, Front Specification
22×9-16
Tires, Rear Specification
18×6-12.125
Brakes
Brake System Type
Hydraulic
Parking Brake
Mechnical
Electric
Generator
40 A
Electrical
Vehicle electrical system voltage: 12 V
Battery
Battery
12/60 V/Ah
Operational
Operating Speed
Travel speed, laden/unladen: 12.2/12.9 mph(19.7/20.8 km/h) | Lift speed, laden/unladen: 104.3/114.2 ft/min(0.53/0.58 m/s) | Lowering speed, laden/unladen: 98.4/88.6 ft/min(0.50/0.45 m/s)
Operating Conditions
Drawbar pull, laden/unladen: 42000/16500 N
Maximum Pressure
2683 psi(18.5 MPa)
Dimensions
Dimensions
Load centre distance: 24 in (600 mm) | Load distance, centre of drive axle to fork: 17.7 in (450 mm) | Tread, front: 41 in (1041 mm) | Tread, rear: 42.3 in (1074 mm) | Tilt of mast/fork carriage forward/backward: 5/6° | Fork dimensions: 2×4.8×42 in (50×122×1070 mm) | Distance between fork-arms: 10-41.3 in (255-1050 mm) | Minimum plvoting distance: 24.3 in (617 mm) | Gradeability, laden/unladen: 39/16 %
Wheelbase
61.8 in(1570 mm)
Height
mast lowered: 86.2 in (2190 mm) | Free lift: 4.3 in (110 mm) | Lift: 118.1 in (3000 mm) | mast extended: 166.3 in (4225 mm) | of overhead guard: 86.5 in (2198 mm) | Seat height relating to SIP: 51.1 in (1299 mm) | Coupling: 14.6 in (370 mm)
Overall Length
138.6 in (3520 mm)
Length
to face of forks: 96.5 in (2450 mm)
Overall Width
(without backrest): 50 in (1270 mm)
Width
Backrest: 45.8 in (1164 mm) | Fork-carriage: 43.3 in (1100 mm) | Aisle width for pallets 1000 x 1200 crossways: 141.3 in (3590 mm) | Aisle width for pallets 800 x 1200 lengthways: 149.2 in (3790 mm)
Ground Clearance
laden, below mast: 3.1 in (80 mm) | centre of wheelbase: 5.9 in (149 mm)
Turning Radius
84.3 in (2140 mm)
Capacities
Load Capacity, Land
8000 lb (3500 kg)
Axle Capacity, Front
Loading, laden: 18560 lb (8290 kg) | Loading, unladen: 5405 lb (2450 kg)
Axle Capacity, Rear
Loading, laden: 18560/2670(8290/1210) | Loading, unladen: 7825 lb (3550 kg)
Hydraulic Capacity
18.5 gal (70 liter)
Weights
Weight
13230 lb (6000 kg)
Features
Features
Operator type: Seated