2025 HANGCHA Box Car Special Forklift 8,000-12,000lbs FP45CB

Information

2025 HANGCHA Box Car Special Forklift 8,000-12,000lbs FP45CB

XF Series Box Car Special Forklift is developed on basis of existing XF series by Hangcha, with world-leading technologies, a world-class forklift that can meet your demand in all dimensions thanks to the overall upgrading in appearance modeling, energy conservation and environmental protection, comfort, safety, and reliability. Application of new technologies including load-sensing hydraulic system, energy-efficient lighting system, low-emission engine, effective noise and vibration control, and brand-new control system offers higher eciency and lower cost for your work.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2025
  • HANGCHA
  • Box Car Special Forklift 8,000-12,000lbs FP45CB
  • 70 A
  • OKAMURA Powershift
  • LPG
  • Available
  • Backrest: 51.7 in (1314 mm) | Fork-carriage: 49.2 in (1250 mm) | Aisle width for pallets 1000 x 1200 crossways: 145.3 in (3690 mm) | Aisle width for pallets 800 x 1200 lengthways: 153.1 in (3890 mm)
  • mast lowered: 86.2 in (2190 mm) | Free lift: 4.3 in (110 mm) | Lift: 118.1 in (3000 mm) | mast extended: 166.3 in (4225 mm) | of overhead guard: 86.5 in (2198 mm) | Seat height relating to SIP: 51.1 in (1299 mm) | Coupling: 14.6 in (370 mm)

Specifications

  • 2025
  • HANGCHA
  • Box Car Special Forklift 8,000-12,000lbs
  • FP45CB
  • Pneumatic
  • CPYD45-XW24B-CB | PSI 4.3L LPG CERT
  • 105 hp (77 kW)
  • LPG
  • 2300 r/min
  • 6
  • 4294 cm3
  • 332.85/1400 N·m/r/min
  • OKAMURA Powershift
  • FWD/RVS: 1/1
  • Cushion 2×/2
  • 22×12-16
  • 18×8-12.125
  • Hydraulic
  • Mechnical
  • 70 A
  • Vehicle electrical system voltage: 12 V
  • 12/60 V/Ah
  • Travel speed, laden/unladen: 12.1/12.8 mph (19.5/20.6 km/h) | Lift speed, laden/unladen: 92.5/102.4 ft/min (0.47/0.52 m/s) | Lowering speed, laden/unladen: 98.4/88.6 ft/min(0.50/0.45 m/s)
  • Drawbar pull, laden/unladen: 44000/16500 N
  • 2683 psi(18.5 MPa)
  • Load centre distance: 24 in (600 mm) | Load distance, centre of drive axle to fork: 18.1 in (450 mm) | Tread, front: 43.9 in (1115.2 mm) | Tread, rear: 44.3 in (1125 mm) | Tilt of mast/fork carriage forward/backward: 5/6° | Fork dimensions: 2×6×42 in (50×150×1070 mm) | Distance between fork-arms: 12.2-47.2 in (310-1200 mm) | Minimum plvoting distance: 24.3 in (617 mm) | Gradeability, laden/unladen: 36/16 %
  • 61.8 in(1570 mm)
  • mast lowered: 86.2 in (2190 mm) | Free lift: 4.3 in (110 mm) | Lift: 118.1 in (3000 mm) | mast extended: 166.3 in (4225 mm) | of overhead guard: 86.5 in (2198 mm) | Seat height relating to SIP: 51.1 in (1299 mm) | Coupling: 14.6 in (370 mm)
  • 142.3 in (3615 mm)
  • to face of forks: 100.2 in (2545 mm)
  • (without backrest): 55.9 in (1420 mm)
  • Backrest: 51.7 in (1314 mm) | Fork-carriage: 49.2 in (1250 mm) | Aisle width for pallets 1000 x 1200 crossways: 145.3 in (3690 mm) | Aisle width for pallets 800 x 1200 lengthways: 153.1 in (3890 mm)
  • laden, below mast: 3.1 in (80 mm) | centre of wheelbase: 5.9 in (149 mm)
  • 87.8 in (2230 mm)
  • 10000 lb (4500 kg)
  • Loading, laden: 22060 lb (8290 kg) | Loading, unladen: 5290 lb (2450 kg)
  • Loading, laden: 22060/3020 lb (9970/1370 kg) | Loading, unladen: 9790 lb (3550 kg)
  • 21.1 gal (80 liter)
  • 15080 lb (6000 kg)
  • Operator type: Seated