2021 HANGCHA Box Car Special Forklift 8,000-12,000lbs FP35CB

Information

2021 HANGCHA Box Car Special Forklift 8,000-12,000lbs FP35CB

XF Series Box Car Special Forklift is developed on basis of existing XF series by Hangcha, with world-leading technologies, a world-class forklift that can meet your demand in all dimensions thanks to the overall upgrading in appearance modeling, energy conservation and environmental protection, comfort, safety, and reliability. Application of new technologies including load-sensing hydraulic system, energy-efficient lighting system, low-emission engine, effective noise and vibration control, and brand-new control system offers higher efficiency and lower cost for your work.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2021
  • HANGCHA
  • Box Car Special Forklift 8,000-12,000lbs FP35CB
  • 40 A
  • OKAMURA Powershift
  • LPG
  • Available
  • Backrest: 45.8 in (1164 mm) | Fork-carriage: 43.3 in (1100 mm) | Aisle width for pallets 1000 x 1200 crossways: 141.3 in (3590 mm) | Aisle width for pallets 800 x 1200 lengthways: 149.2 in (3790 mm)
  • mast lowered: 86.2 in (2190 mm) | Free lift: 4.3 in (110 mm) | Lift: 118.1 in (3000 mm) | mast extended: 166.3 in (4225 mm) | of overhead guard: 86.5 in (2198 mm) | Seat height relating to SIP: 51.1 in (1299 mm) | Coupling: 14.6 in (370 mm)

Specifications

  • 2021
  • HANGCHA
  • Box Car Special Forklift 8,000-12,000lbs
  • FP35CB
  • General
  • CPYD35-XW24B-CB / PSI 4.3L LPG CERT
  • 105 hp(77 kW)
  • LPG
  • 2300 r/min
  • 6
  • 4294 cm3
  • 332.85/1400 N·m/r/min
  • OKAMURA Powershift
  • FWD/RVS: 1/1
  • Cushion 2×/2
  • 22×9-16
  • 18×6-12.125
  • Hydraulic
  • Mechnical
  • 40 A
  • Vehicle electrical system voltage: 12 V
  • 12/60 V/Ah
  • Travel speed, laden/unladen: 12.2/12.9 mph(19.7/20.8 km/h) | Lift speed, laden/unladen: 104.3/114.2 ft/min(0.53/0.58 m/s) | Lowering speed, laden/unladen: 98.4/88.6 ft/min(0.50/0.45 m/s)
  • Drawbar pull, laden/unladen: 42000/16500 N
  • 2683 psi(18.5 MPa)
  • Load centre distance: 24 in (600 mm) | Load distance, centre of drive axle to fork: 17.7 in (450 mm) | Tread, front: 41 in (1041 mm) | Tread, rear: 42.3 in (1074 mm) | Tilt of mast/fork carriage forward/backward: 5/6° | Fork dimensions: 2×4.8×42 in (50×122×1070 mm) | Distance between fork-arms: 10-41.3 in (255-1050 mm) | Minimum plvoting distance: 24.3 in (617 mm) | Gradeability, laden/unladen: 39/16 %
  • 61.8 in(1570 mm)
  • mast lowered: 86.2 in (2190 mm) | Free lift: 4.3 in (110 mm) | Lift: 118.1 in (3000 mm) | mast extended: 166.3 in (4225 mm) | of overhead guard: 86.5 in (2198 mm) | Seat height relating to SIP: 51.1 in (1299 mm) | Coupling: 14.6 in (370 mm)
  • 138.6 in (3520 mm)
  • to face of forks: 96.5 in (2450 mm)
  • (without backrest): 50 in (1270 mm)
  • Backrest: 45.8 in (1164 mm) | Fork-carriage: 43.3 in (1100 mm) | Aisle width for pallets 1000 x 1200 crossways: 141.3 in (3590 mm) | Aisle width for pallets 800 x 1200 lengthways: 149.2 in (3790 mm)
  • laden, below mast: 3.1 in (80 mm) | centre of wheelbase: 5.9 in (149 mm)
  • 84.3 in (2140 mm)
  • 8000 lb (3500 kg)
  • Loading, laden: 18560 lb (8290 kg) | Loading, unladen: 5405 lb (2450 kg)
  • Loading, laden: 18560/2670(8290/1210) | Loading, unladen: 7825 lb (3550 kg)
  • 18.5 gal (70 liter)
  • 13230 lb (6000 kg)
  • Operator type: Seated