2025 HANGCHA X series 4 Wheel Pneumatict 8,000-10,000lbs CPD50-XC4-I

Information

2025 HANGCHA X series 4 Wheel Pneumatict 8,000-10,000lbs CPD40-XC4

The optimized design of the wide-view mast, wide-view overhead guard and low dashboard enables a broader view of the operator and higher safety.

With increased turning angle and small turning radii of the inner and outer steering wheels, the vehicle can operate in narrow aisles.

Features may include:

Exterior
  • A new exterior design method is used to form a stylish and elegant exterior with streamlined curved surfaces and smooth ethereal lines.
Comfort
  • In accordance with the ergonomically design, the wheelbase is increased to enable enlarged leg space. The radius of the hand wheel is reduced to 300mm and the seat can be adjusted backwards and forwards, so that the operator can choose the best driving position.
Safety
  • The optimized design of the wide-view mast, wide-view overhead guard and low dashboard enables a broader view of the operator and higher safety.
High speed, high efficiency
  • With increased turning angle and small turning radii of the inner and outer steering wheels, the vehicle can operate in narrow aisles.
Advancement
  • The high-frequency MOSFET integrated controller ensures smooth and accurate driving and lifting control, and has excellent speed regulation performance, good performance of electronic control matching the motor, functions of regenerative braking, reverse braking and anti-sliding on ramps, etc., and high safety and reliability.
Maintainability
  • The fully opened hood quite facilitates the maintenance of the battery, oil pump motor and electric control assembly.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2025
  • HANGCHA
  • X series 4 Wheel Pneumatict 8,000-10,000lbs CPD50-XC4-I
  • Drive (battery or mains), diesel, petrol, fuel gas: Electric
  • Available
  • Fork-Carriage: 1200 mm | Aisle for pallets 1000 x 1220 crossways: 4410 mm | Aisle for pallets 1200*1000 Lengthways: 4610 mm
  • Mast Lowered: 2250 mm | Mast Extended: 4170 mm | Of Overhead Guard (Cabin): 2360 mm | Seat /stand: 1080 mm | Coupling: 320 mm

Specifications

  • 2025
  • HANGCHA
  • X series 4 Wheel Pneumatict 8,000-10,000lbs
  • CPD50-XC4-I
  • Pneumatic
  • HANGCHA GROUP CO.,LTD. | CURTIS | Type Designation: CPD50-XC4-I
  • Drive rating S2 60 min: 20 kw | Lift rating at S3 15%: 25.4 kw
  • Drive (battery or mains), diesel, petrol, fuel gas: Electric
  • Type unit: MOSFET/AC
  • Service: Hydraulic
  • Mechanical
  • 28×12.5-15
  • 23×9-10
  • 2x/2
  • Acc. to DIN 43531/35/36 A,B,C, no: No
  • voltage, K5: 80 V / 542 Ah
  • Travel, laden/unladen: 15.5/16.5 km/h | Lift, laden/unladen: 0.31/0.475 m/s | Lowering, laden/unladen: 0.5/0.4 m/s
  • Max. Drawbar pull, laden/unladen: 21000 N
  • time, laden/unladen (0-394”): 5.0/4.8 s
  • Sound level at the driver´s ear according to EN / DIN 12 053: 76 dB (A)
  • Operating pressure for attachments: 200 bar
  • Load centre distance: 600 mm | Load distance, centre of drive axle to fork: 530 mm | Tread, Front: 1182 mm | Tread, Rear: 1109.5 mm | Tilt of mast/fork carriage forward/backward: 5/10° | Free lift: 150 mm | Lift: 3000 mm | Fork: 60/150/1200 mm | Distance Between Fork-Arms: 310-1150 mm | Max. Gradeability, laden/unladen: 15/19 % | Battery: 1026×709×782 mm | Towing coupling, type DIN 15170: 35 Pin
  • 2030 mm
  • Mast Lowered: 2250 mm | Mast Extended: 4170 mm | Of Overhead Guard (Cabin): 2360 mm | Seat /stand: 1080 mm | Coupling: 320 mm
  • 4275 mm
  • To Face Of Forks: 3075 mm
  • 1494 mm
  • Fork-Carriage: 1200 mm | Aisle for pallets 1000 x 1220 crossways: 4410 mm | Aisle for pallets 1200*1000 Lengthways: 4610 mm
  • Laden, Below Mast: 150 mm | Centre Of Wheelbase: 152 mm
  • 2680 mm
  • Rated: 5000 kg
  • Loading Laden: 10430/1320 kg | Loading Unladen: 2610/4140 kg
  • Loading Laden: 10430/1320 kg | Loading Unladen: 2610/4140 kg
  • Oil for attachments: 76 l/min
  • Tank (drain & refill): 40 liter
  • Service: 6750 kg | battery: 500 kg | Min. battery: 500 kg | Max. battery: 530 kg
  • Operator type: Seated | Tyres: Pneumatic