Harvey & Company LTD

  • 88 Kenmount Road
  • St. Johns, NL A1B 3R1
  • Call Us: (709) 738-8911
  • https://www.harveyco.com/
Print This Page

2025 HANGCHA X series 4 Wheel Pneumatic 12,000-22,000lbs CPD90-XC4

Information

2025 HANGCHA X series 4 Wheel Pneumatic 12,000-22,000lbs CPD100-XC4

The inclination angle of the ergonomically designed hand wheel is adjustable and the seat can be adjusted 150mm forwards and backwards, so that the operator can choose the best driving position.

The high-frequency MOSFET integrated controller ensures smooth and accurate driving and lifting control, and has excellent speed regulation performance, good performance of electronic control matching the motor, functions of regenerative braking, reverse braking and anti-sliding on ramps, etc., and high safety and reliability.

Features may include:

Exterior
  • A new exterior design method is used to form a stylish and elegant exterior with streamlined curved surfaces and smooth ethereal lines.
Stability
  • Small-diameter solid tires, front and rear battery sets and other technologies are used to enable excellent stability of the vehicle.
Comfort
  • The inclination angle of the ergonomically designed hand wheel is adjustable and the seat can be adjusted 150mm forwards and backwards, so that the operator can choose the best driving position.
Safety
  • The optimized design of the wide-view mast, wide-view overhead guard and low dashboard enables a broader view of the operator and higher safety.
Maintainability
  • The fully open front and rear battery lids easily facilitate battery maintenance.
Advancement
  • The high-frequency MOSFET integrated controller ensures smooth and accurate driving and lifting control, and has excellent speed regulation performance, good performance of electronic control matching the motor, functions of regenerative braking, reverse braking and anti-sliding on ramps, etc. and high safety and reliability
High speed, high efficiency
  • With several speed gears, the vehicle is adapted to different operating environments.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2025
  • HANGCHA
  • X series 4 Wheel Pneumatic 12,000-22,000lbs CPD90-XC4
  • Drive (battery or mains), diesel, petrol, fuel gas: Electric
  • Available
  • Fork-Carriage: 1800 mm | Aisle for pallets 1000 x 1220 crossways: 5180 mm | Aisle for pallets 1200 x 1000 Lengthways: 5380 mm
  • Mast Lowered: 2700 mm | Mast Extended: 4530 mm | Of Overhead Guard (Cabin): 2565 mm | Seat /stand: 1430 mm | Coupling: 423 mm

Specifications

  • 2025
  • HANGCHA
  • X series 4 Wheel Pneumatic 12,000-22,000lbs
  • CPD90-XC4
  • Pneumatic
  • HANGCHA GROUP CO.,LTD. | CURTIS | Type Designation: CPD90-XC4
  • Drive rating S2 60 min: 35 kw | Lift rating at S3 15%: 52 kw
  • Drive (battery or mains), diesel, petrol, fuel gas: Electric
  • Type unit: MOSFET/AC
  • Service: Hydraulic
  • Mechanical
  • 8.25-15
  • 250-15
  • 4x/2
  • Acc. to DIN 43531/35/36 A,B,C, no: no
  • voltage, K5: 96 V / 1104 Ah
  • Travel, laden/unladen: 13.5/15.5 km/h | Lift, laden/unladen: 0.28/0.4 m/s | Lowering, laden/unladen: 0.545/0.345 m/s
  • Max. Drawbar pull, laden/unladen: 36000 N
  • Operating pressure for attachments: 190 bar
  • Load centre distance: 600 mm | Load distance, centre of drive axle to fork: 630 mm | Tread, Front: 1489 mm | Tread, Rear: 1536.5 mm | Tilt of mast/fork carriage forward/backward: 5/10° | Free lift: 190 mm | Lift: 3000 mm | Fork: 70/200/1200 mm | Distance Between Fork-Arms: 400-1800 mm | Max. Gradeability, laden/unladen: 12 % | Battery: 1420×825×570 mm | Towing coupling, type DIN 15170: 40 Pin
  • 2500 mm
  • Mast Lowered: 2700 mm | Mast Extended: 4530 mm | Of Overhead Guard (Cabin): 2565 mm | Seat /stand: 1430 mm | Coupling: 423 mm
  • 4895 mm
  • To Face Of Forks: 3695 mm
  • 1970 mm
  • Fork-Carriage: 1800 mm | Aisle for pallets 1000 x 1220 crossways: 5180 mm | Aisle for pallets 1200 x 1000 Lengthways: 5380 mm
  • Laden, Below Mast: 200 mm | Centre Of Wheelbase: 183 mm
  • 3350 mm
  • Rated: 9000 kg
  • Loading Laden: 19560/2400 kg | Loading Unladen: 5910/7050 kg
  • Loading Laden: 19560/2400 kg | Loading Unladen: 5910/7050 kg
  • Oil for attachments: 180 l/min
  • Tank (drain & refill): 153 liter
  • Service: 12960 kg | battery: 3430 kg | Min. battery: 3430 kg | Max. battery: 4720 kg
  • Operator type: Seated | Tyres (solid rubber, superelastic, pneumatic, polyurethane): SE