2025 HANGCHA Electric Lithium-ion Cushion 4,000-6,500lbs FB20CLi

Information

2025 HANGCHA Electric Lithium-ion Cushion 4,000-6,500lbs FB20CLi

Lithium-ion technology (Lithium Iron-Phosphate), was developed jointly by HANGCHA and CATL for use in material handling equipment applications. These innovative and reliable battery cells and modules are manufactured to the highest standard by CATL exclusively for HANGCHA's forklift line.

Features may include:

  • Battery Technology: We use square lithium iron phosphate batteries. These are the same type of batteries used in new electric vehicles.
  • Design: The module uses a sturdy and lightweight aluminum alloy frame. It is also designed to provide excellent heat dissipation.
  • Safe and Effective: Charging efficiency as high as 98% and the thermal runaway temperature is at 600 °C and above.
  • Adapted to Low Temperatures: Comes standard with an electrical heating feature, ensuring normal operation in low temperatures.
  • Quick Charging: Fully charges in 2 hours.
  • Efficient: Can use opportunity charging to allow for continuous use in multi-shift operations.
  • Long-Lasting: 4000 charging cycles with a capacity retention greater than 80%.
  • Maintenance-Free: Lithium-ion batteries do not require manual maintenance such as watering.
  • Green and clean: The batteries are pollution-free, release zero emissions, and are recyclable.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2025
  • HANGCHA
  • Electric Lithium-ion Cushion 4,000-6,500lbs FB20CLi
  • HCFA Model: FB20CLi
  • Power Type (Electric, Gas, Diesel, LPG): Electric
  • Available
  • Track, front: 35 in (890 mm) | Track, rear: 36.2 in (920 mm) | Fork-Carriage: 40.9 in (1038 mm) | Aisle for pallets 39" x 47" crossways: 137.6 in (3490 mm)| Aisle for pallets 31.5" x 47" Lengthways: 145.5 in (3690 mm)
  • Mast Lowered: 77.6 in (1970 mm) | Mast Extended: 159.3 in (4045 mm) | Of Overhead Guard: 88.6 in (2250 mm)

Specifications

  • 2025
  • HANGCHA
  • Electric Lithium-ion Cushion 4,000-6,500lbs
  • FB20CLi
  • Cushion Tire
  • HCFA Model: FB20CLi
  • HANGCHA GROUP CO.,LTD.
  • Designation: CPD20-XD2-CI
  • Drive Motor, 60 minute rating: 24.1 hp (18 kw) | Pump Motor, 15 minute rating: 24.1 hp (18 kw)
  • Power Type (Electric, Gas, Diesel, LPG): Electric
  • Hydraulic
  • Motor: MOSFET/AC
  • Service, operation / control: Pedal / Hydraulic
  • Parking, operation / control: Hand / Mechanical
  • 21x7x15
  • 16x5x10-1/2
  • 2x/2
  • Voltage: 48 volts
  • 606 Ah/6 hr. rate
  • Travel, with/without load: 11.5 mph (18.5 km/h)/11.5 mph (18.5 km/h) | Lift, with/without load: 88.6 fpm (450 mm/s)/129.9 fpm (660 mm/s) | Lowering, with/without load: 98.4 fpm (500 mm/s)/98.4 fpm (500 mm/s)
  • Max. Drawbar Pull, with/without load: 3316 lbf (14750 N)/2142 lbf (9530 N)
  • Working for Attachments : 2698 psi (181 bar)
  • Load centre distance: 24 in (600 mm) | Load distance, centre of drive axle to fork: 6.8 in (427 mm) | Tilt of mast/fork carriage forward/backward: 6/8° | Free lift: 5.5 in (140 mm) | Lift: 118.1 in (3000 mm) | Fork: 1.6×5×42 in (40/125/1070 mm) in | Max. Gradeability, with/without load: 23/25 %
  • 51 in (1295 mm)
  • Mast Lowered: 77.6 in (1970 mm) | Mast Extended: 159.3 in (4045 mm) | Of Overhead Guard: 88.6 in (2250 mm)
  • 127.5 in (3238 mm)
  • To Face Of Forks: 85.4 in (2168 mm)
  • 42.1 in (1070 mm)
  • Track, front: 35 in (890 mm) | Track, rear: 36.2 in (920 mm) | Fork-Carriage: 40.9 in (1038 mm) | Aisle for pallets 39" x 47" crossways: 137.6 in (3490 mm)| Aisle for pallets 31.5" x 47" Lengthways: 145.5 in (3690 mm)
  • Laden, Below Mast: 3.5 in (90 mm) | Centre Of Wheelbase: 3.9 in (100 mm)
  • Outside: 73.3 in (1863 mm)
  • Rated: 4000 lbs (1810 kg)
  • Loading Laden: 9047/1368 lbs | Loading Unladen: 3177/3707 lbs
  • Loading Laden: 9047/1368 lbs | Loading Unladen: 3177/3707 lbs
  • Service: 8466 lbs (3840 kg) | Battery: 849 lbs (385 kg)
  • Operator type: Sit Down | Tires Type: Cushion
  • Carriage DIN 15 173, class/type A,B: IIA