2025 HANGCHA 3-Wheel XC series Li-ion 2500-4000lbs CPDS20-XCD8G-SI

Information

2025 HANGCHA 3-Wheel XC series Li-ion 2500-4000lbs CPDS13-XCC2G -SI

Covering models with a tonnage of 1.3t, 1.5t, 1.6t, 1.8t and 2.0t respectively, the new XC series three-point new energy electric forklifts are HANGCHA’s dedicated-purpose battery forklifts subsequent to the XC series four-point dedicated-purpose battery forklifts.

Equipped with the dedicated lithium battery cells and modules for the XC series forklifts, which are developed jointly by HANGCHA and CATL, the truck has the features of high lifting speed, high driving speed, excellent ergonomic design, easy operation and high safety.

Features may include:

Excellent ergonomic design
  • The truck has a large operation space more than 50% larger than that of the traditional three-point electric truck.
  • The enlarged brake pedal and appropriate regenerative braking function can effectively reduce the driver’s fatigue
Easy operations and maintenance
  • With the fully sealed hood and side plates, all major components including the electrically controlled components, motor, electrical components, etc. are sealed from dust and water
  • Vulnerable parts and key parts are arranged reasonably to facilitate maintenance and repair
Advancement
  • The high-frequency MOSFET integrated controller ensures smooth and accurate driving and lifting control, and has excellent speed regulation performance, good performance of electronic control matching the motor, functions of regenerative braking, reverse braking and anti-sliding on ramps, etc., and high safety and reliability.
  • The ultra-high power AC drive motor has a bridge structure
Comfort
  • Owing to the low center of gravity and good stability, the driver feels comfortable during turning
  • Silence, no pollution, energy saving and other advantages meet environmental protection requirements

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2025
  • HANGCHA
  • 3-Wheel XC series Li-ion 2500-4000lbs CPDS20-XCD8G-SI
  • Electric
  • Available
  • Fork-carriage: 1000 mm | Aisle for pallets 1000 x 1200 crossways: 3290 mm | Aisle for pallets 800 x 1200 lengthways: 3415 mm
  • mast lowered: 1978 mm | mast extended: 3945 mm | of overhead guard STD: 2100 mm | Seat/stand : 1000 mm | Coupling: 520 mm

Specifications

  • 2025
  • HANGCHA
  • 3-Wheel XC series Li-ion 2500-4000lbs
  • CPDS20-XCD8G-SI
  • Electric Stand Up End Control (Docker)
  • Drive rating S2 60 min: 5x2 AC KW | Lift motor rating at S3 15%: 15 AC KW
  • Electric
  • MOSFET/AC | Inmotion
  • Service: Hydraulic
  • Mechanical
  • 200/50-10 solid | Tread: 932 mm
  • 15x4.5 - 8 solid | Tread: 178 mm
  • number front rear: 2x/2
  • 80/302 V/Ah
  • Travel, laden/unladen: 15/15 km/h | Lift, laden/unladen: 400/550 mm/s | Lowering, laden/unladen: 470/420 mm/s | Acceleration time, laden/unladen (0-10m): 4.9/4.5 s
  • Drawbar pull, laden/unladen: 3050/3700 N | Max. Drawbar pull, laden/unladen: 11200/11000 N |
  • Sound level at the driver´s ear according to EN / DIN 12 053: 74 dB (A)
  • for attachments: 150 bar
  • Oil: 35 l/min
  • Load centre distance: 500 mm | oad distance, centre of drive axle to fork: 365 mm | Tilt of mast/fork carriage forward/backward: 7/6 Grad | Free lift: 145 mm | Lift: 3000 mm | Fork dimensions: 40/122/1070 mm | Distance between fork-arms: 240/1000 mm | Gradeability, laden/unladen: 13/15 % | Max. gradeability, laden/unladen: 15/18 %
  • 1407 mm
  • mast lowered: 1978 mm | mast extended: 3945 mm | of overhead guard STD: 2100 mm | Seat/stand : 1000 mm | Coupling: 520 mm
  • 3034 mm
  • to face of forks: 1964 mm
  • 1149 mm
  • Fork-carriage: 1000 mm | Aisle for pallets 1000 x 1200 crossways: 3290 mm | Aisle for pallets 800 x 1200 lengthways: 3415 mm
  • laden, below mast: 100 mm | centre of wheelbase: 110 mm
  • 1600 mm
  • Rated: 2000 kg
  • loading, laden: 4580 kg | loading, unladen: 1365 kg
  • loading, laden: 620 kg | loading, unladen: 1835 kg
  • Tank drain & refill: 43 liter
  • Service: 3200 kg | Min. battery: 280 kg | Max. battery: 350 kg
  • Operator type: seated | Towing coupling, type DIN: 24 Pin