2025 HANGCHA 3-Wheel Rear Drive Forklift 3000lbs CPDS15-AHC2

Information

2025 HANGCHA 3-Wheel Rear Drive Forklift 3000lbs CPDS15-AHC2

A series 3000lbs rear-wheel driving three pivot electric forklift truck is very suitable for operating in limited space, with small turning radius, which is the ideal forklift truck in store, supermarket and warehouse, etc.

Features may include:

Ergonomic
  • State-of-the-art design makes a clear footwell with wellplaced pedals which give plenty of room for large feet space and help the driver's comfort working.
  • The simple, concise instrument panel minimizes confusion but gives the key warnings to operator
Maneuverability
  • Drive to the rear steering wheel gives safe truck operation in confined spaces. The turning angle of rear wheel is upto 90 degree, compared with the same load capacity 4 pivot trucks, the turning radius is smaller about 400 to 450mm
  • Driving speed is automatically reduction during cornering
Reliability
  • AC motor is the simple brushless motor, less maintenance and better suitability for wet & explosive conditions.

Photos

Highlights

  • St. Johns, Newfoundland and Labrador
  • 2025
  • HANGCHA
  • 3-Wheel Rear Drive Forklift 3000lbs CPDS15-AHC2
  • Electric
  • Available
  • Fork-carriage: 1000 mm | Aisle for pallets 1000 x 1200 crossways: 3160 mm | Aisle for pallets 800 x 1200 lengthways: 3285 mm
  • mast lowered: 1980 mm | mast extended: 3955 mm | of overhead guard: 2105 mm | Seat/stand : 940 mm | Coupling: 500 mm

Specifications

  • 2025
  • HANGCHA
  • 3-Wheel Rear Drive Forklift 3000lbs
  • CPDS15-AHC2
  • Electric Stand Up End Control (Docker)
  • Drive rating S2 60 min: AC 4 KW | Lift motor rating at S3 15%: AC 8.6 KW
  • Electric
  • CURTIS AC
  • Service: Hydraulic
  • 18x7-8 solid rubber | Tread: 835 mm
  • 200/50-10 solid rubber
  • number front rear: 2/1x
  • 24/920 V/Ah
  • Travel, laden/unladen: 9/9.5 km/h | Lift, laden/unladen: 0.220/0.330 mm/s | Lowering, laden/unladen: 0.580/0.480 mm/s | Acceleration time, laden/unladen (0-10m): 6.0/5.8 s
  • Drawbar pull, laden/unladen: 6400/6300 N | Energy consumption acc. to VDI cycle: 3.5 kWh/h
  • Sound pressure level at the driver´s seat: < 70 dB (A)
  • for attachments: 145 bar
  • Oil: 16 l/min
  • Load centre distance: 500 mm | Load distance, centre of drive axle to fork: 365 mm | Tilt of mast/fork carriage forward/backward: 6/5 Grad | Free lift: 155 mm | Lift: 3000 mm | Fork thickness: 35/100/920 mm | Gradeability, laden/unladen: 7/9%
  • 1220 mm
  • mast lowered: 1980 mm | mast extended: 3955 mm | of overhead guard: 2105 mm | Seat/stand : 940 mm | Coupling: 500 mm
  • 2785 mm
  • to face of forks: 1865 mm
  • 990 mm
  • Fork-carriage: 1000 mm | Aisle for pallets 1000 x 1200 crossways: 3160 mm | Aisle for pallets 800 x 1200 lengthways: 3285 mm
  • laden, below mast: 100 mm | centre of wheelbase: 100 mm
  • 1510 mm
  • Rated: 1500 kg
  • loading, laden: 3930 kg | loading, unladen: 1370 kg
  • loading, laden: 570 kg | loading, unladen: 1630 kg
  • Service: 3000 kg | battery: 675 kg
  • Operator type: Seated